Search results

family model specification number displacement, cc serial number skh 725 u1g 2ra ch25s 68501 725 300 131 6901 When facing the exhaust ports on this engine, the right-side, exhaust, manifold flange is bent. If I place the manifold mating flanges on a flat metal surface, what is...

left cylinder compression, cold=160 psi. Add oil; reads200psi right cylinder compression, cold=45 psi. Add oil; reads 60 psi

engine model=407777 engine type=0174 E1 Engine code=010511yh This is a used tractor of unknown history that I have owned for a week. I removed all the fuel and replaced it with zero ethanol gasoline. We used it 3 days ago. It stalled out after about 1 hours use. Two days ago, I could not...

I believe my tractor is the same as a Simplicity model 4212H hydro The rear tire is flat and I want to install a tube. It appears that I would have to use a gear puller to remove the rear wheel from the axle. Is it possible to change this 18x9.5-8 tire while the wheel is still mounted...

I removed hood and there are 2 studs on the engine head that engage the muffler bracket. I removed the nuts that hold the bracket onto the studs but I cannot pull the bracket off the studs. This is what prevents muffler removal Engine Model Type Code Briggs and Stratton 281707 0125-01...

I unbolted the exhaust manifold but cannot remove the muffler. Is engine removal necessary?

This 15x6.00-6 tubeless tire has been flat for years. I removed the tire, sanded the rim, and painted the rim. I cleaned all the rust and dirt from the tire bead. The tire bead is not circular as it should be. The bead is not circular where the tractor weight rested on the flat tire. I...

Starting LT140h38 is difficult because the park brake pedal must be depressed very firmly to allow the starter to crank the engine when the key-switch is turned to the crank position. How can the parking brake to switch (nc/no) [part # 2-2886] be adjusted so less foot-pressure is needed on the...

While mowing, the Snapper hydro control lever requires constant attention to maintain a constant forward speed or to adjust speed to changing grass conditions. I have to hold the hydro control lever for the entire mowing event. I have installed a better seat on this mower so the reach to the...

I own a Deutz Allis 612H. This is the same tractor as the Simplicity 4212H. The valve stem leaks at the wheel. I want to be certain that I use the correct replacement valve stem. The leaking, Dill TR412 valve stem that I removed from the wheel may not be the correct valve stem. I have the...