Search results

My brother once live trapped a pack rat. That night he took it over to a local drug dealers residence, and let it go over there. Never found any more after that.

A All I use is a twist tie wire with the paper removed. I've got some thumb drills, but haven't used them (too big, and don't want to damage the jet)

The area where I take the mower to wash it out, after dumping the bagger, is quite a ways from my lawn. Then there is the time it takes to find a free hose to hook up to the sprayer, the deck is pretty much cooled down. Have done this for a couple of years with no real problems so far, (but not...

Wish mine came with a manual, (actually, neither of them came with one. Had to download it)

Bet the fuel isn't getting through from the float bowl to the carb. Is the float stuck, and have you tried cleaning the ports on the bolt holding the float bowl to the carb (forget what the part is called. It's usually brass, and a 1/2" wrench to take it off the bowl). I've had issues a few...

I made a water sprayer out of 1/2" pvc pipe I drilled some small holes in, that I just drive over, stop the mower, engage the mower, drop the deck as low as it will go and let it run for about 45 seconds. Comes out clean as a whistle , and picks up really well the next time I mow.

Could it also be not working too well because the deck underneath is clogged up? Our mower has problems filling the baggers with cuttings when the mower deck hasn't been cleaned underneath

Hi all, New to this forum. Have an older FR500 tiller. Unable to start. Guessing this might be due to not being able to take it out of 1st gear and put it in neutral. Question: do I have to remove the motor to tear apart the transmission. Thinking the grease in the tranny is hard packed. It did...