Search results

Do you know the value of what this model goes for both in need of repair and nothing needed ?

Hey guys, Im looking at a John Deere LX188 to put some work into and have for a second mower. The one Im looking at needs a hood / seat and some mechanical work with the fuel system. What do these go for in this condition and what do they go for with no issues ? Are there any things I need to...

Hey guys, does anyone know the part number or where to buy just the headlight lens cover for a LT2180 ??

So I followed the wires from the seat switch to a relay box, I disconnected the relay and it all works fine now.

Could I also use a jumper on the seat switch ? Thanks.

So it will drive now but when I try to engage the mower deck it shuts down ??

Im looking for the solid rear body panel that goes behind the seat and spans across to each side. Part # AM132478 SX85 and GX85 will be the same.

Just to follow up with this, I found the issue. After testing all the safety switches they were fine but, On the transmission, there is a sensor that threads into the transmission and has 2 purple wires connected to it, I unplugged the clip and inserted a jumper wire and everything works fine...

Hey guys, I am working on a John Deere GX85, It will start and run but when you either engage the mower deck or try to drive, The motor dies. What electronic modules do these mowers have on them that could cause this, and where are they located ? Thanks !!

Hey guys, I am going to replace the belt on my 44" snowblower, Is there any tips / known procedure in doing this so I dont end up having to taking everything apart ? EDIT: Well I went and replaced it, It wasnt bad as I thought. All I had to do was remove the plate were the pullies are bolted to...

Hey guys, On my john Deere X540 I have the Kawasaki FD731V-HS02 and it seems lean on the starting circuit. I always have to use the choke when fully warmed up since new and starts hard when cold also. I have checked and cleaned the carb, replaced fuel filter, plugs air cleaner. I see there is 2...

Hey guys, I am looking for a Power Flow unit for my John Deere X540 with a 48" C deck. Thanks

Hi guys, I have for sale a John Deere 48" plow for x300/x500 series tractors. Located in Central New York. $400.00