Search results

I mean 82.5 Kevlar

I might order a Kelvar deck belt 88.5" A little longer might a difference

I was cutting the grass for at least 20 minutes before it failed.

It's an older Craftsman 917.257651 15.5hp Manual shows 140067 for the deck belt. Seller showed 140067 82" I said 88" in my post, it was 82".

I had a deck belt wear out on my Kohler engine 15.5hp 42" deck. I ordered another belt online since the original manual says the belt is 88" belt. The belt came in today and seemed a hair too short but did fit. The belt is too short and the belt spins the blades some before I lift the engage...

Hey Guys, I was just given a 15 year old new Generac portable Generator made by Briggs&stratton. My brother-in-law bought it 15 years ago from Home Depot. Brought it home, put gas in it, ran it for 15 minutes, shut it off, drained the gas out and put it in storage. 15 years later he ask me if I...

About three years ago I gave my Brother-in-law my 23 year old Tecumseh 3.5HP Pressure Washer after I picked up a bigger one with a Honda engine. Yesterday he offered it back to me after he bought a new pressure washer, so I took it. He said the old one was leaking fuel and he could not fix it...

It a push forward the stick and go or pull back the stick for reverse. I thought it was a belt slipping, and replaced it, no help. I can start the engine push the stick and nothing happens. I can pull back the stick and nothing happens now. After a few minutes of running in place I can push...

I have a Colman Powermate generator that is 30 years old and up to six weeks ago was running great. We used it for 2 days during a power outage. I have kept it clean and start it every few months and let it run for 15 minutes to freshen the gas.. Today due to another storm coming into Florida...

I spent many hours trying to get a McCullough 3516 chainsaw started -without success. It was one of two older model chainsaws that were donated to me from old friends. I was able to get the Homelite to run but the McCullough was a frustrating failure. I had to walk away from it several times to...

After getting the old Homelite running last week, I got the carb rebuild kit in place for the MAC. It fires up and dies. After trying to restart, nothing. Waiting about 15 minutes, the MAC fires, revs up and dies. I connected the new fuel lines going from the filter in the tank, to the fuel...

I have inherited two chainsaws from friends this year. Both saws have been sitting up for around ten years or so. I have cleaned both coils and both saws to me give a good purple spark. New spark plugs and I have rebuilt both carbs, one is a Zama and the other is a WBL. Neither carb was dirty...

I was given a Parmac S5000 gas generator last month by a friend going into a nursing home. He was given the generator six years before that but said it never ran right. His wife's brother bought the generator new a few years before that but also said it never ran right. Lucky me right? The...