Search results

So if you run double blades this will cause more strain etc.??

Good suggestions, at my age I hope I remember those for next year.

I purchased Grasshopper 21" Shredder Mower Blades part no. 320322 that helped greatly in shredding up the leaves and pine needles. Now I have to figure out how to keep some of the leaves that are being shredded to blow out in the right front of the mower deck. I mow at 3" height, possibly...

I purchased the mulching kit for my front mount 61" mower deck. It does a good job with mulching grass, don't know how well it will do for leaves. I do know it does not work well on pine needles, are there better blades that will mulch leaves and pine needles?

Purchased last fall, new price $3030 sell for $2750. Grasshopper has increased the price on all of their equipment after my purchase, so new price even more. Greenville, OH is 30 miles northwest of Dayton, OH

I purchased it new and it was delivered in this condition. Even though it was running on two cylinders it was still faster and more powerful than my previous grasshopper with a similar 3 cylinder engine that had 23 hp instead of the 29 hp of the new unit. The only reason I knew something was...

I have a 3 cylinder Kubota gas engine that caused the inside of the muffler to glow red, It was caused by one of the coil packs being defective and not firing. This is a new grasshopper mower that was shipped from the Grasshopper factory in this condition. After it was fixed no more glow and...

Still available

61" deck

Located in Greenville, Ohio 45331. I will call you

I purchased a Model 25 Vacuum Grasscatcher System with my new Grasshopper 729T, used it last fall about 5 times did a good job but found at my age (75) it was difficult open the rear door of the Hopper. Thinking about selling the whole Vacuum System, is there anyone interested in purchasing the...

I purchased a Model 25 Vacuum Grasscatcher System with my new Grasshopper 729T, used it this fall about 5 times did a good job but found at my age it was difficult open the rear door of the Hopper. Thinking about selling the whole Vacuum System, is there anyone interested in purchasing the...

I have a new 729T6 with the motorized lift snow blower. I just installed a cab (enclosure) on mine. The enclosure is all metal no vinyl, vinyl is used for non motorized lift snow blowers. I might be able to answer your questions.

The difference between the 2000 and the 2020 is hp 23 vs 29. I spoke with a Grasshopper Technician from the Grasshopper Factory this morning he advised that he didn't believe it hurt anything but he would have changed the oil. The muffler is now a catalytic converter and it should be alright...

Thanks for all of the replies. Still waiting for a reply from Grasshopper. Got the snow blower and enclosure mounted. Now some other questions. The engine now idles very high, prior to the fix it idled low or normal in my opinion, also when you mow etc. do you run with the throttle wide open...

Got the Grasshopper back yesterday, in the process of mounting the enclosure and snow blower. Did send an email to Grasshopper technical department to advise them of the issues, still waiting for a reply.

I was told they did contact Grasshopper and was told the Engine has a two year warranty and nothing further needed to be done. I did ask for the Grasshopper to be replaced or at least the Engine.

The service shop is not concerned about the possibility of gasoline in the oil, gasoline washed away oil on piston/cylinder possibly scoring cylinder or burning out the muffler. I am concerned about those, what are your thoughts.

Service department found the problem. One of the coil packs was defective causing the engine to run on two cylinders instead of three. the unburned fuel from the deactivated cylinder was burning in the muffler. This Grasshopper was purchased new several months ago and now has 14 hours on it...

I now see that the exhaust muffler glows bright red/orange inside the muffler. I don't believe this is normal, will call service department to repair.

That is good to hear, so what you are telling me that the motor lift assembly is able to lock in at a certain height and the bottom skids are in mid air and it will blow snow with no problem and not damage the lift mechanism.

On my previous 2000 grasshopper 721 I was able to lock the snow blower about 1" or more of the ground when blowing my gravel driveway. I am concerned that all of the weight with the addition of the snow and the blower rotation will all be on the motor assembly. Will the assembly be able to...

I just purchased a new Snow Blower Model 512 with electric lift. Will I be able, after I clearing my asphalt driveway in front of the house just lift the snow blower an 1" and continue clearing my gravel driveway that goes out to my detached garage. The snow blower skids will not be touching...

I just purchased a 2020 Grasshopper 729, having just sold my 2000 721. One noticeable difference other than more power and speed is the exhaust noise. On the 729 the exhaust sounds as if you are next to a wall and the exhaust is bouncing off it, that is when you are wide open throttle with the...

That is the dealer price prior to discounts it includes the wheels. I am purchasing a total package to replace everything I have today, which includes mower , snow blower and cab, vacuum package.

I need to clarify, the bar tire is not what I am asking about. The turf tires I am buying separately is what I am asking about. Price difference between standard at $385 and those that accept chains at $250

I am about to purchase a new 729T Mower with Bar Tires. In addition I want to purchase Turf Tires, they are offering the standard Turf Tires at $385 per set vs the Turf Tires at $250 that accommodate tire chains. My assumption is the difference is that they are smaller diameter to allow chains...

I purchased the mower new in year 2000 so it came with valve stems. I believe the tires are run flat. I did put air in one of them and it inflated slightly, I then took the valve core out to deflate, no air came out and it is still inflated.

I have a year 2000 with the 60" front mower deck. The front tires of the deck have tire valves in them for adding air but nothing in the deck manual states anything about adding air or what the air pressure should be only that they are flat proof. What happens if you add air to them and what...

What is the difference between a Kubota WG750-B and WG750-E Engine. I can't find a Model number tag on my engine and I am hoping there is a physical difference that can be seen to advise me which one I have. The reason for asking that the E engine requires unleaded gas and the B requires...

I have the Kubota Gas water cooled engine. The problem I have is when I start mowing I have to go around some obstructions, consequently I am going at the slowest speed and the engine is still cold. The Grasshopper keeps jerking going forward or backward with the hand controls oscillating back...

I have a 2000 Grasshopper with the Kubota gas engine. Twice I had it in for service to my Kubota dealer for carburetor issues. The first time the carburetor was replaced. When I got it back the throttle control was such that I had to push it to the half way point before the rpm would change...

When just started and I slowly accelerate the Grasshopper wants to jerk continuously when moving forward until I pick up speed. Makes it difficult to ease around flower beds etc. After a while it will stop doing it. It is not a choke issue or engine issue. Is it hydrostatic belts or some...

What is involved in changing the Hydrostatic Belts for a 721 Kubota Gas. Currently when I first start out (Engine and Belts cold) going slow around obstructions the mower will jerk and continue jerking when trying to move forward until a higher speed is obtained. It will stop doing that once...