Search results

John Deere L110 with a 13h.p. engine, when I turn the key to shut off the engine, it starts to sputter and spit but won't completely shut down, I have to choke it out. I replaced the ignition switch but got same result. Any help is greatly appreciated. Thank you!

Husqvarna snow blower Model # ST227P

John Deere D140 (1GXD140EKCC324968) 22 h.p. Briggs Model # 407777 Type # 0274G5 Code # 120224YG Runs perfect for about 10 min. then cuts out on one cylinder. Has new carb. kit, new plugs, new fuel filter, new air filter, new coils. Fuel tank is vented ok, no fuel lines kinked. disconnected...

John Deere D140 (1GXD140EKCC324968) 22 h.p. Briggs Model # 407777 Type # 0274G5 Code # 120224YG Runs perfect for about 10 min. then cuts out on one cylinder. Has new carb. kit, new plugs, new fuel filter, new air filter, new coils. Fuel tank is vented ok, no fuel lines kinked. disconnected...

I have a twin cylinder briggs on my sawmill and would like to replace the fuel pump with a electric fuel pump. What electric fuel pump would you suggest? Thanks...

I have a Cub Cadet LTX 1040 Model #13WX90AS009 Serial #1C150H60087 When you press on the pedal to go forward it takes off like it should for about 30 feet and then gradually slows down to a stop, let off the pedal and press down on the pedal again and it will take off again like it should and...

I have a simplicity tr/mwr-prestige 23h and it will start with cruise control engaged. This machine has the cruise control lever on the right side and it needs to be in neutral and the brake depressed to start. The engine will start without the brake being depressed and without the cruise...

I have a White rider Model # LT 542 G Serial # 1E236B30253 D.O.M. 5/2006 (7 speed) all speeds 1-7 work fine but 1-3 speed works for about 5 min. and slowly comes to a stop. The belt stops turning. 4-7 speed everything works the way it should. I removed the centrifugal clutch to make sure the...

Greetings; I have a Tecumseh (ohsk120 222019e) mounted on a wood spliter. The engine will run perfect for about 1 hour and 10 minutes. Then it will start to miss and sputter and it will start to back fire until it quits. If you let it sit for a half an hour you can start it up again and...