Search results

Why would the Carb solenoid wire only draw 6.5 volts? Shouldn't it be 12 Volts? Motor runs when I spray starter fluid in the carb, then dies. If I jump the solenoid with 12 volts, it runs. What should I be looking at?

I'm installing a John Deere Proprietary Kawasaki FD731V-HS02 Liquid Cooled motor into a Ferris IS3000Z I'm having a problem matching the motor harness to the frame harness. The Kawasaki FD731V was stock for John Deere X540 or X520 mowers. The wiring schematics I see are only parts diagrams...

Where does the yellow wire from the motor harness go to. It has the round end with a hole. It looks like it might go to the solenoid, but could be a ground. Does anyone have the wiring schematic for this mower? Thanks for helping me out.

I have a self propelled Cub Cadet mower Model CC46ES that starts right up, runs a few seconds, then it dies. Here are the numbers: Mower Model 12AE46JA009 Mower Serial Number 1F071K30583 Engine Serial Number 2P70M0C1010102A0314 Here's what I have done Changed out the gas New Carb New Fuel Lines...

Replaced Ignition, Seat Switch Brake Switch, Time Delay Module, Fuses I can jump the hot wire on the starter to the ground and the starter turns over. But when I turn the key, nothing happens. No sound, no click. I am behind on a job and need this fixed yesterday. Please help if you can.

It looks like a key, but it doesn't look like it goes through the shaft. How do I remove the key and get the pulley off to replace the spindle? Is there a video anyone knows of. Thanks in advance for your help. I have jobs waiting on this fix.

I checked fuses and battery terminals. Battery is charged. When I turn the key, I hear a faint click from the starter area. I replaced the starter, ignition switch, both relays, and time delay module. With the switch on the small terminal from the solenoid has no power. Any ideas? I can't...