Search results

does anyone have a part number for a good replacement carb

I have this old tractor with 16hp motor and 48"deck ,has hi and lo and 3 speed trans , can someone tell me the rite gear to be in to mow with it

I have a craftsman gt5000 model 917-276101. tractor seemed to lose power going up hill,so I replaced drive belt, with one from sears that I had in package for about ten years, its a light brown belt its 1/2 by 82 1/2 it seems better but not right .whats the best belt to use ,and how much tension...

my trimmer has new carb, fuel lines,and vent and I still have the same problem , starts great and runs strong for about 30 mins, then engine starts to lose power and shake, if I turn it off for a hour or so and restart its fine for another 30 or some mins ps I also changed gas cap, im...

I have a new battery in tractor and checked the voltage at full wide open, and reads 12volts, I checked the alternator wires ac volts read 29acv,believe that to be good, but I cannot find the reg, can someone tell me wear it is , and what the voltage should be, I don't think this means anything...

My Honda has the white lever auto return choke "16610-z2d-802" the lever goes from choke to open way to fast is their anything I can do to slow it down.

I have a shindiawa trimmer with a blue case and no model or serial number, trimmer has a straight shaft and lever lock, I can only make out a 7 in the model number, my question is what years did they make them with the blue case, or can someone tell me models that used the blue case, Thanks::frown:

I have a 10.5 b&s motor with electric start, with engine running and I walk over to mower with my meter in hand to check charging system,with meter on volts it starts bouncing like crazy , ive disconnected the alt wires and still bouncing ,driving me crazy, next I took a pair of upper cables...

my mower starts great and runs fine at idle and mid way but at full wide open its surging, don't want to drill out jet .

Ihave a self propelled md 8073 im looking for the drive control lever from the wheel to the control rod, and the parts that hold the two together thanks

I HAVE A HUSQVARNA 44 CHAIN SAW WITH A SERIAL # 6141412, WITH A BLACK TOP COVER, WANTING TO KNOW YEAR IT WAS BUILT TO BUY PARTS, CAN SOMEONE HELP.THANKS

I HAVE THIS GRAVELY ZERO TURN, I BELIEVE ITS A 1995, HAS A KOHLER CV20, 20 HP V TWIN MOTOR, WOULD ONLY RUN ON FULL CHOKE, CLEANED CARB,AND IT RAN GREAT FOR 5 HOURS,THEN STALLED AND AGAIN WILL ONLY RAN ON CKOKE, THIS TIME I REMOVERED THE GAS TANK AND FLUSHED IT OUT, IT REALLY WASNT BAD, I THEN...

I have this motor on my mower is there a tool to remove the seat from the carb its a walbro or can you tell me how its removed that's. jim

I have a nice running driving 13 hp Honda 2013 its automatic, the trouble is when mowing and I step on the brake the shifter will not return to neutral unless I move it . also can you tell me what this tractor is worth its in really good shape ,ive moved and im going to need a bigger tractor...

I have a craftsman lt1000 tractor model number 917-272680, with 17hp b s motor it cranks hard then starts and smokes blue for about 5mins clears up runs good , why the hard cranking and smoke .battery and starter are great shape thanks

Hi guys I have a old locke mower ,and im looking for a repair manual, its a 8hp , model 200451-0175. thank you

Im looking for a replacement carb,I love this old trimmer but it needs a carb, not a kit, please help

I have a older ferris walkbehind mower, with a fc420v motor, no battery,i have no voltage to electric pto,but have 34 ac volts coming from stator,no dc volts to pto,

I have a 2013 Honda tractor with hyd trans cant get fliud from Honda .what can I use in its place

I picked up this tractor with the trans removed, was removed for oil seal replacement, guy lost interest so I got it really cheap, my question is does anyone have a picture of where the arm with a spring attacked from the trans pulley go.. its a H2013HDA. also where can I pickup a trans selector...

I HAVE A WLA-1 carb on my 500t blower , my question is can someone tell me what the (piston assy is, number 12318539130) and what it does, im thinking its some kind of power valve, its brass has a oring, and spring

I checked the compression and only has 50 psi, removed muffler no scratches, no leaking seals im thinking rings

I found a company that sells the small D with a long handle ,and comes with a large D tool with a short handle , not cheap 49.00 dollars but I think its well worth it .

blower is two years old , fuel lines and filter have been replaced , carb cleaned, has good blue spark ,will not run , even with a shot of starter fluid, im thinking maybe low compression, any thoughts

trying to find a small d carb adjusting tool ,can someone help me out or know of away I can adjust this carb its a WLA-1. THANKS

my eb7001 blower ran great still today , found that it has a cracked piston below lower piston ring , what would cause this , blower serviced each season, 50/1 fuel mix. thanks, jim::frown:

my fc540v kaw mower is using oil, fouling plug, and smokes blue on and off mustly on , can you tell me how to check it for bad rings or headgasket, and what compression should be thanks ,was going to keep changing plugs but want to fix it

I have a ferris mower with a fc540v motor ,calls for a r n11yc spark plug ,but I keep fouling it after running it for 4 or 6 weeks , its burning oil but for right now I have to keep running it ,can I go to a hotter spark and if so how hot should I go. thanks

I have a 6 hp briggs & Stratton on my power washer ,it starts up fine and runs really good but for only 10 mins, I checked gas cap , carb air filter and plug

I have a ferris mower with a 17 hp Kawasaki motor, its charging 13 volts at idle and with it wide up 12 volts with or without blades on , it seems backwards to me, id think it would put out more wide open then at idle

I have a 1280 howard price mower with bate wings ,61hp diesel motor, the front deck runs all the time , replaced switch and soloid, wiring all looks fine

my 20 hp craftman with kohler motor will shut right off every time I try to ingage the blades ,they spin free by hand

is there adjustment I can make to get more rpm out of this mower

I just removed the blade and blade clutch .to replace drive belt ,the blade clutch disc fell and im not sure if it madders witch way I put the disc