Search results

Results 1 to 7 of 7
  1. B

    725DT6 Powerfold deck problem

    Bought a new 725DT6 a couple of weeks ago. Mowed 8 or so acres around the house yesterday. Brought it out today and lifted the powerfold deck. Took the blades off, sharpened them and put them back on. Let the deck down and the actuator just died. It stopped at about 3 1/2 inches. Won't...
  2. B

    722D2 bogging down in grass it once easily cut

    This started last summer and has gotten progressively worse. When I get into relatively tall grass I used to easily cut, the pto seems to slow down and there is a squeal in the rear of the tractor. If I back off the tall grass the pto comes back up to speed and works OK until the next patch of...
  3. B

    PTO Clutch failure on 722D2

    The bearings went out on my PTO clutch while mowing last week. I've ordered a new one. This is probably a dumb question but is it normal for the engine to not turn over when the clutch bearings are seized up? I'm not much of a mechanic but thanks to the great advice from members of this forum...
  4. B

    Cannot get splined yoke off PTO shaft on 722d front mount

    While mowing yesterday the yoke with the sleeve that connects to the front mount mower broke. What was left was the square shaft that fits inside the sleeve and connects to the mower deck. That part looks fine. I decided to order the yoke and sleeve assembly as all that was left was the...
  5. B

    9772 Deck question

    Does anyone have a routing diagram for the drive belt on a 9772 front mount deck? I have the new belt on and it is working but is rubbing against the base of the idler arm and smells like burning rubber so I know something is wrong. I have the belt routed on the inside of the idler arm base...
  6. B

    722D Fuel draw tube question

    I know this is a dumb question. I want to see if the draw tube is clogged. Do I just twist and pull it out after removing the fuel line? I can't see anything attaching it to the fuel tank so I assume it just snaps into place? I'm ignorant but game.:confused3:
  7. B

    722D electrical problem

    Brought my 722d out for the first time in a couple of months. It was running perfectly the last time I used it. It started fine but when I looked at the voltage meter it showed about 4 volts and did not appear to be charging. Turned the PTO on and it dropped down to about 2 volts. The battery...
Top