Search results

Im replace belt since its torn along with spring since its never been changed,and set my guides

Im having issues with belt jumping off when running into thick grass. What size belt should I buy to run on this to be tight not jump off. Im thinking 1/2 shorter than the original belt. I replaced the pulley and bearing on the pulley that moves back in forth when engaged and disengaged. Belt...

Here it is sir

I think one went here

I see a hole on one side where the grass comes out when cutting i dont see one on the left side. This is a older 2014 it has no wheels on it at all when I got it a few yrs ago.

I have these coming and a pulley so hope this helps dont have access to having anything welded for sure hope this works without welding

So my idler arm when blade lever is up which blades are disengaged my idler arm with pulley just lays on the deck. I can take hand on the back of arm and press down and the pulley and arm will raise up a few inches then release and clock the pulley is back laying on the deck. Not sure but...

Does that help with the pulley leaning down when not engaged it just lays on the deck until its engaged then it raises up a little. I think its going to be alot better since I have a little tighter belt now. So do order those parts its brake pads for pulley for a 42 inch troy bilt ?

Brake pads on the pulley i really dont know the names for lawn mower parts. I know the pulley but not bake pads

I d I did put on a little shorter belt and from just engaging it and leaving it in a few min then repeatly engaging and disengaging it feels alot tighter no speaking or smoking a little burn smell first few min with a new belt. Then when I disengage the pulleys stop then but the looser belt...

Yes the pulley that has the bracket that moves when the blade is engaged is loose and lays down on deck I can lift up on it but when let go it just leans back down not sure if the bracket where the rod goes in needs to be bent to lift it up some? When I engage push lever handle down for...

Deck belt

1/2 × 96

I have all the guards around the pulleys on the outside and the two in the middle of the deck has those brackets two because when it jumps off its always the one that has the little bar in the whole the pulley that is attached to the arm Where can I find a 96 instead a 96.5

I have all the guards around the pulleys on the outside and the two in the middle of the deck has those brackets two because when it jumps off its always the one that has the little bar in the whole the pulley that is attached to the arm.

Yes sir. I understand that, when disengaging the blade does your belt look super loose I can just reach under there and pull the belt off if I want

I think my current belt is way to loose. It's not in bad shape but whenever I disengage the blades and lift the lever up the belt comes off the pulley. Then when I engage it dont come on and I get down and look the belt is off. I need a new belt that has not been stretched I think. My spring is...

Could it be the starter selenoid

It was running fine with no issues. Parked it and 3 days later this happens. You think just bolt on a new carb. I guess it took cutting the yard to get the gas smell. Never had the smell before.

Here is my problem. Bought this pony I new it had a bad battery (or maybe a failing starter as well). After it sitting up a week in my garage it never smelled like gas in the garage. I used it like four days ago it ran great I even cut it off a few times,it always cranked right up. After using...