Search results
Results 1 to 3 of 3
-
S
LT155 - Engine rebuild - have some questions
OK fellas I got it apart and have a surprise. No shavings at all. Lifters do have a small divot started. Exhaust is more pronounced than the intake lifter. But no shavings are anything else in the crankcase to say major issues. But I had absolute loss of power after the lifter clatter...- SteveinNC
- Post #4
- Forum: John Deere
-
S
LT155 - Engine rebuild - have some questions
Born2Mow, I'm with you. I did not do these measurements on the cam nor with a magnetic base so no these are not precise. They were take at the end of the push rod while seated into the rocker arms. So there is some side to side movement with will not report exact measurements. I was...- SteveinNC
- Post #3
- Forum: John Deere
-
S
LT155 - Engine rebuild - have some questions
All, I have a LT155 with the Koehler CV15s and I had the lifter tick and then low power. Measured lift on the end of the push rods and getting measurements of .177 intake /.192 exh as compared to the factory specs of .353/.360 lift. So I'm pulling the engine to go through it. #1 Question...- SteveinNC
- Thread
- Replies: 5
- Forum: John Deere