Search results

I will replace it and then check all pulleys, look for any rough spots, and then run it and run it for 5 minutes, then check for any heat in any of the pulleys anything else i should check for ?

Thanks for your feedback I was getting the deck belt and I was thinking it was Width:5/8" Length:135 1/2" and the part number was 483243 if so then this belt is very short

My wife loves to mow, and when her father passed away, he left her his Scag mower (Model: STCII-61V-26FT-EFI). She has been mowing since she was old enough to sit on her dad's knee, so I don't think this is an operator issue. However, we've had terrible luck with belts. We've replaced both the...

So I measured the belt and contacted the supplier and they said it measured the same as the scag and when I measured it was about a 1inch smaller than the broken belt, Was able to get a real scag belt and confirmed that it was indeed longer. Put the new belt on and it went on without any issues.

Thanks for all the help,, I checked all the pulleys and all seem to be moving free and look in good shape. I am pretty sure I know why it came off yesterday as I did not have it on the crank shaft correctly. I am trying to put it now on the correctly pulley (head shame) and wow it's tight even...

Thanks for the manual , I will review the maintenance schedule, Bad news the drive belt came off again it did not break this time but it did come off after about 10 minutes of mowing . Any ideas what it could be Yes it is a OEM belt but company did a very good write up to define that it was...

I was able to release the drive tensioner for the deck belt and this then allowed me get the drive belt on. The trick was using the breaker bar and socket (Thank you old posts ) having an extension would have helped massively but was able to squeeze the bar in and get it in to the square hole...

My father passed 2 years ago and left me his Scag 26 HP 61" cut Tiger Cat Zero Turn Mower Model # STC61V-26CV-EFI. It had been left in a storage building and used a few dozen times since then. I was able to bring it home and give it the once over but the drive belt broke right away :-( I am...

I am pretty sure it's the spring put in red in the below pic. Where is the engine spec code found is it on a plate some where ?

I have a Husqvarna LGT2654 when running it sounded like it was going to stall. I remove the air intake to clean the carburetor, I found a small broken spring on the governor rod. Spring is about an inch long and was broken on one side.Trying to find a diagram of where the spring goes to and a...