Search results

Reapply is fine, I'll see how some sort of thin layer of slick film works. Like I said earlier, the PNW where this is at, the grass is seldom dry. Many landscape maintenance companies mow even during heavy rain. Wet mulched grass sticks to the under-deck easily. I am surprised the air...

Silicone Spray, I'll try it. BTW, dry grass in the Pacific Northwest, NOT. Trig

Grass gets wet and sticks under the mowing deck on my HRN216 series mower. It builds up and ruins the aerodynamics, makes mulching less effective and even stalls the engine by impeding the blade. I clean it out good after every use. What is good to spray under there to reduce sticking? Is...

Honda recommends a counter-clockwise direction for mulching. My previous mower was clockwise. Made a difference but my HRN series cut better than the previous mower (not Honda) either way.

I was lucky.. Lowes had the one I wanted HRN216VYA. Nobody else including Home D, Honda Power Dealers or Lawn & Garden had them.

My HRN rolls very easy, either forward or back. A slight push on a smooth level surface and it rolls about 15 feet.

Needle bearings are not designed for side loads (movement along the shaft axis). Ball bearings are better for that. With the low weight of a mower it's likely OK for needle or ball. However, the bronze bushings are probably best of all. Normally they are sintered (made from powder) so that...

I looked at a belt and sure enough, just like gotomow posted. The belt is covered in a fabric. Kevlar makes sense since it also has a high melt temperature as well as strength. Way cool!

I was contemplating this and realized that the belt must slide over the pullies at low moving speed (a lot of slipping). The pullies (metal?) must be getting polished and the belt smooth. Seems like some heat due to friction must be present.

Thanks to all for clarifying that. I am surprised it works and even lasts a long time. Good to hear, I would rather change a belt than a transmission. :)

On the new Honda HRN (i.e. HRN216) series movers how does Smart Drive vary the mowers travel speed? Seems like I heard that it's a slipping belt system and the transmission pivots to tighten the belt. The tighter the belt the faster the mower moves. If that's true, that design doesn't keep...

Thanks to StarTech also! :)

I have installed the governor seal Honda# 91231-891-003 on my new HRN216 mover. It has the GCV 170 engine. It fits, is the correct part. It took me about 20 minutes total, I took my time. It's disappointing that Honda opted not to include it on the engine. There was oil residue already...

The governor shaft seal is not scheduled to arrive until Sept 25.

Daryl G :: Excellent description. Makes sense. We learned something. Thank You for answering the questions.

I have a new Honda HRN216 mower. The user manual (image below) shows to mow Counter Clockwise (CCW) for mulch and Clockwise (CW) for bagging. That is opposite of my mowing pattern with the previous mower (not a Honda). What in the design makes that direction better? Is that common? Have...

I will report in about a week or two...

My thoughts also Scrubcadet10... We'll find out...

Was thinking maybe list not updated yet. I will find out since I got one for $4.60. Crank housing and gov shaft look the same but...?

Does the governor seal (91231-891-003) for the GCV160 work on the GCV170 the engine for the HRN series?

What's the difference between the actual part for a 16620-ZL9-003 and the widely available 16620-Z8D-305. Different stroke, temperature, size?