Search results

Latest. Well I can get the engine to run for more than a minute at times which is more than any gas I put in the air intake so I believe the engine is getting gas. So now I’m playing with the carb adj screw. The engine has a cutoff unless you hold on the safety bar so im going to rig it so I...

I used the new diaphragm but no luck. It will only run the few seconds of gas I put in the air/choke. I was able to remove the plastic piece with a rubber washer where the screw etc is. I couldn’t remove what looked to be a screw head but it seemed to have a few holes that were clear. I’ll...

I took out screw with spring and washer but that’s all that would come out. After attempting to pull out any other parts and not wanting to damage anything I use my high pressure to blow out. Put washer spring then screw and tighten until spring started to compress. I pulled several times...

That was my first thought too. a lot of my parts that are included in the kit AAA look fine on my machine

Thanks again. I found ~ $50 for a rebuild kit online. I’m going to visit a local parts store to see if they might have anything.

Well I took the carburetor off cleaned it and put it back together but can’t get it to run still. The gasket thing was in good shape so cleaned it and put it back. There was a part I put in wrong so took it apart and fixed it but still no luck. The second time I unscrewed the carb adjustment...

Ah, I saw a video of someone doing just that. Thanks for the confirmation sir!!

Thanks. So I guess I need to try and disconnect the piece from the intake tube and pull it up and away from the tank with the tube/pipe attached and look for an issue. It seemed hard to disconnect the intake.

3.5 HP. Started with Black smoke and slow or rough idle for a few months but just keep using it. Finally more black smoke then would not start. Some things I did. Replaced head gasket. Checked spark. New fuel non ethanol. New oil made for small engines. Cleaned magneto etc. Finally...

Hi, Jim from atl. Had my Murray for 26 years. Love the hydrostatic drive. Cheers!

Hi, I bought this Murray in 1994. Had the motor replaced on it once but otherwise never had the drive belt replaced that I can recall. Today the belt for the deck came off so I drove it to the house but I’m thinking somehow this loose deck belt May have caused the drive belt to come off and...