Search results

BELT MAY BE STRETCHED OR IDLER PULLEYS WHEN WAS IT SERVICED LAST

ok all line from tank to carb seems as it should be its a honda 2315 v twin carb has a float chamber with four screws holding it up can I remove this fully and clean main jet and float

I replaced fuel line from the tank to filter with new metric pipe which is .35 mm smaller than oem 1/4 inch pipe during this took off pipe from pump to carb turned engine over and it pumps in continuous short bursts but not stopping should the pump actually pump at constant flow could it be...

Rivets im still having probs with this and repair shop not taking in at min its got to be some carb issue the mower cuts fine but it surges in speed in drive as if its getting fuel in short bursts any help app

Yes limited knowledge but the cable should be loose when not engaged when you slide lever up does the spring tension any amount the tank under wheel arch is actuator or vacum switch connected to white ank under hood via lever on dash that must have air flow to get cable to work

yes all back to normal just a question if you dont mind I had to replace an inline fuel filter the small transparent type and since then the mower is running perfectly but why can I see little or no fuel in the filter I thought it should be full all the time

ok belt change and marked improvement do new belts need to bed in

Rivets thank you all seems to be coming together do you have any clue as to how the vacum blade engage system works

yes all seems good belt is stretched so ive been told while looking at idler pulleys noticed a top up tank on hydro unit should i keep itr full and if so what with

thanks very much i will ask dealer the spec in the morning

Thanks bought this used last season assumed belts are ok so not checked them will do so over weekend how often should belts need changing and thanks again.

Hi new to this my issue is on my 2315 v twin honda when going too fast in heavy grass or cutting wet grass the blades will periodically slow or stop cutting until i let it build up again its vacum blade engage system im being pointed towards overstretched belt any help most app.