Search results

I found this online, so i guess even though it doesn't look right, i guess it is. http://service.mtdproducts.com/CortonaOutputFiles/104941_CR12_troy_Transmission/104941.pdf Thanks for the help everyone!

So i didn't take a picture of the rear spring before i took it apart. Is this the correct connection location? It doesn't seem right because it rubs on the bar below it.

Thanks. I bought both belts at a local repair shop, and they seem to be holding up well so far. The problem now is the mower won't move in speeds 1-3, but speeds 4-6 work fine. Is there some kind of adjustment that needs to be done?

Thanks guys. That makes sense because i actually had to remove the pulley to get the belt into the guide in picture #2. I would assume the correct belt would just slip in. I will order the OEM belt, thanks!

Hi, I just put this belt on my TB30R mower, and mowed the yard one time and the belt is toast, It's on the verge of snapping (see pics). Any idea what could be wrong? This is the belt i bought: https://www.amazon.com/gp/product/B07Y7HVXYX/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

Just following up, I fixed that hole with JBWeld, basically put it on both sides, put on the gasket and bolted it together really tight. Then I started the engine and I found another hole that i didn't realize went all the way into the engine. I patched that with JB weld as well. I tried to...

Thanks. I'll give it a shot, i have nothing to lose at this point.

Ok i had nothing to lose so i took it apart, rear engine mowers suck, i had to remove a ton of crap to get to the engine. Anyways, it looks like the worse case possible (see pics)

So bad news, i was able to get a better look at it today, and the oil is blowing out of the hole the guy drilled into the engine to jerry-rig the carb. The worst part is he drilled right in between the head and the engine block (right where the gasket is). Is there anything i can do or is...

Thanks for the reply, The engine oil is not overfilled. The guy i bought it from also drilled into the engine to try and jerry-rig up an old carb (see pic) hopefully he didn't go too deep.. I need to bypass the seat saftely switch so i can get a better look at it tomorrow. Sorry I'm a total...

Long story short, i bought this off craigslist, it was missing intake manifold, carb, and air intake manifold and filter. Guy said it ran fine, and I just needed to replace those parts. So here i am 2 weeks later, all parts replaced, i start it up and and it runs, but there oil dripping out of...

Thanks!

Hi can anyone tell me the bolt size/dimensions/grade that part #691148 is? Thanks.