Search results

Results 1 to 7 of 7
  1. M

    MTD Lawnflite 940 Forward, Neutral & Reverse Selection Problems.

    A pleasure to be able to share my experience with the machine. (I also have a Japanese Canycom mower/tractor - expensive but solid - 4 wheel drive, high low speed drives, diff lock etc.) Yardman for flatter stuff Canycom for my really steep heavy going stuff. If I can give more details for the...
  2. M

    Kohler courage v twin 23 hp compression release valve?

    When delivered the starter motor shaft was bent. It was readily apparent. How could it get bent? The bend was just the section immediately ourdise of the starter body. I presume an assembler dropped the motor but put it in even though it was bent. A workshop friend rotated it in his lathe and we...
  3. M

    MTD Lawnflite 940 Forward, Neutral & Reverse Selection Problems.

    BTW - adjust the shift lever with the transmission in neutral and then check F and R travel and gear engagement. Attached the transmission diagram. Also website where I got the part - about 2 years ago. The new assembly was slightly different externally but checked dimensions etc and all was good.
  4. M

    MTD Lawnflite 940 Forward, Neutral & Reverse Selection Problems.

    Here in New Zealand the agent was absolutely hopeless. Said they would repair by complete replacement of the assembly. They really weren't interested in anything else. They sold me new bevel gears and clutch fork and that didn't work. The importers were also hopeless. hey did not import the...
  5. M

    Kohler courage v twin 23 hp compression release valve?

    My MTD fitted with that motor also had a problem a bit like that. It ultimately burnt out the starter relay. Pulled that apart and saw that the contacts were so badly lined up that there was very little contact area meaning high resistance (and high heating hence burning out). Replaced with a...
  6. M

    MTD Lawnflite 940 Forward, Neutral & Reverse Selection Problems.

    If your machine is anything like my MTD Series 900 with the continuously variable drive then you might find that the problem wear in the bevel gear assembly. See picture. I have similar problems but more significantly my machines started to bang loudly "down the back" when turning a corner or...
  7. M

    Kohler 23 hp choke/throttle hookup?

    Great coverage. I have a Kohler 23 HP Courage fitted to a Yardman Series 900 50" riding mower with the CVT system. It has done about 150 hours. From new it was very reluctant to go up a mild slope. My earlier 46" Yardman with its 23HP Briggs breezed up it. I had to pump the accelerator...
Top