Search results

Is there a trick or easy solution to removing the oil filter on a Kohler Courage 22 hp SV715 without oil going everywhere on frame and dripping on the main engine pulley? I put a bunch of paper towels behind and below the filter but it still released a lot more oil than I thought was inside it...

Hi folks. My 2012 LTX1046 is cutting slightly lower on the height adjustment side. The height adjustment nut is on the highest possible setting. What else could I do to level this deck? Thanks for your help.

I have never used the headlights or plan on using them in the future. Will there be an issue if I snip and terminate the red and green wires suppling power to the lights. Just want to get those out of the way. Thanks

Good evening. I have a concern about my lawn tractor being able to pull a lawn dethatcher without trashing the trans. I have a 2012 LTX1046 Hydrostatic with a Kohler Courage 22HP engine which I bought used in 2018. It's a great machine for mowing; however, I have never pulled anything with it...

Been a while since I had a problem with my 2012 Cub Cadet VTwin 22hp Kohler, Model #13AP91AT009, Serial #1E112H60400 that I purchased used two years ago. It only has 212 hrs. Two of the last five times mowing, when I went to reverse from the carport, I heard a high pitch whining noise, and the...

Help.. I have a 2012 Cub Cadet LTX 1046 with a Kohler Courage 22hp engine. Is there an easy way to remove the shroud from this engine? After removing all screws and the shroud was free, the genius CC design of the fuel tank bump out right above the shroud prevents it from being lifted off of the...

I purchased a new carb for B&S 875EX series complete with gaskets and o-ring. When I removed the old carb, there was no gasket on the engine side. Only the one on the air filter side. There is the red o-ring, and a bracket holding a spring connected to the choke control, then the carburetor...