Search results

Received and replaced the breather valve assembly and gasket. The new breather valve is just like the original one with only one reed plate. There were some pics on line that led me to think the new one would have two reed plates. It does not. When I removed the original valve, the 4 bolts were...

Removed flywheel to get to the breather valve assembly. If you blow thru the pulse hose back thru the valve cover, the air comes out in the cavity where the breather valve bolts up. Wish I would have done that, engine off, with a cold and then a warm engine just to see the difference...

I found an image of the GTV760 005058-4. #4 0G9100 Breather Assembly 0C3005 Gasket If the reed plate in this breather is not operating properly, could it cause a loss of vacuum pulse to the fuel pump? Thanks for any help.

There is no spark arrester screen and no exhaust whoosh on shut down.

Checked gas delivery from tank to carburetor. When everything is cold, there is a good pulse of gas being pushed from fuel pump outlet when spinning over. Checked again when engine warmed up and started running poorly. The pulse signal is weak going to the fuel pump from the valve cover and...

Thanks for the info and the link to the manual.

It feels like there is plenty of exhaust coming out of the muffler, but I can check that in the morning. Thanks for taking your time to respond. This mower hasn't had the best of care thru the years. I thought I would check the valve adjustment on it also. The only specs I can find are for...

This is a neighbor's mower that it and I need help with. Dixie Chopper 2760HP Silver Eagle with no data sticker on it that I can find. I see where there was a sticker under the seat, but it is gone. Nothing on the right frame either. The Emissions Decal has a date of 2/2012. The 27HP Generac...