Search results

Hello and good afternoon to you. I am still trying to get my head around this machine. What I can tell you is this. I have contacted Briggsbits in the hope their technical might be able to help me locate the issue but they never got back to me after I emailed them photos at their request. No...

Mine is 222c and I am using 209a spring which is new.

And finally we have pictures. Can't exactly explain how I did it but it was something to do with windows 11, photos, right click image, resize, change size to 1000 as advised by Star Tech (thank you) and hopefully bingo. Everyone got that?:unsure:As you might notice I have no pictures of the OEM...

Yeah I feel fairly sure about the choke set up and I'm just going to use that with the lever it came with. Cables are a pain in the A£%& and just something else to go wrong. I'm a keep things simple kind of guy which reflects my intellect exactly. I'm not even going to consider the jetting at...

Now i'm really confused. There is no air vane. The governor lever runs directly from the engine casing by a wire link onto the carb off a preformed ring which also attached is a spring that connects to the throttle plate. The throttle cable attaches to the same plate at a different point. There...

Just tried to add images but it says too big so back to the drawing board. The primer hole on the original carb is top left (as you look at engine with filter removed) The replacement is the same. It does appear most are on the opposite side. Primer on filter is on left too.

Been there tried that. Not a lot of meat on carb or the air filter housing to take much bigger thread so i managed to get two nuts behind damaged area and jb welded them in. I took the carb apart so nothing untoward would happen whilst i was working on it and did proper clean up of internals...

Fair play, held your hands up, so respect Slomo. I'm still holding out for someone who might be able to offer their knowledge. Just out of curiosity, is it likely to be an issue if i use a carb with choke on a system which has originally been designed to run with a primer bulb incorporated into...

Thanks all. Two digits are E1. Quick to jump to conclusions Slomo when in fact I DID NOT buy what you refer to as "Amazon carbs". Also please read my thread correctly and see that the threads were stripped on the carb so cleaning it wouldn't have made the slightest difference to the OEM carb. I...

Hello, I wonder if you might be able to help please? I am in the process of bringing back to life a Briggs and Stratton Intek Edge 6hp that is fitted to a McCulloch self drive mower. I got it second hand and apart from the inevitable rust on the deck it seemed pretty good. Winter is coming so...