Search results

The wheel plastic is worn, thank you.

I will try, I noticed the pulley being turned by the belt, being turned by the engine. I cracked open the old transmission, there is a piece of metal, when the lever is pulled, pushes on a bearing, which pushes on the diff gear, which locks the diff to create drive. So I bent it a little to try...

Does anyone know why these toro self propelled time master transmission fail to drive. I've checked the cable and cable cam, they seem fine. The cable pulls the transmission arm which activates the transmission to turn the wheels, and it does turn, but, the drive strength/power is weak and so...

Champion spark plug, full throttle 3420rpm. Checked governor for play, none. Mounting gasket new. Swapped coil with another machine, same issue. Wire brushed fly wheel. Checked fuel, started a fresh lot, no difference.

No fuel pump, fuel flow is good. Replaced the fuel filter. Thankyou. The mower is. Poulan Pro, 36inch ride on. 2006.

Model. Type. Code. 21B807. 0290 E1. 0512227A. My engine has a miss. I replaced carb, spark, adjusted valves. It runs but misses a beat every twenty or thirty seconds. Like it's starved for fuel for half a second. I've replaced the carb twice, cleaning and checking on the way. My...

Home school is a good idea, we are learning all the time. Our family can't afford to send kids to school, and so education is hard. Be they are happy children, with knowledge about farming and cows.

Amaz, thanks 🙏🏿

Should I replace the cam wheel? Engine 4 yrs old, used commercial 15-20hrs/week. Hard to pull, valves were recently adjusted by stihl dealer. And replaced air and fuel filter. Maybe compression release not working?

I think we're getting closer to solving the issue. I did put a strong spring on the tensioner, and there was slight improvement. Your right about the deck, because I was looking for a mower with catch. I have also replaced the spindles and blades. If I'm right, I got a good bang for my buck. The...

I replaced the tensioner springs with one spring, frm the kids tramp. Seems to be a little tighter, I reckon about an inch play between the pulleys at the longest span. With a taught twang. Checked the idler arm bolt and hole, not egg shaped. Mowed a bit of long grass, no slipping. but this is a...

New pulleys

StarCraft, you have amazing knowledge, thankyou.

This is the belt I bought

I have a ride on mower, poulan pro. The manual clutch is engaging, although it is old, and makes a rough sound when I pull on the belt. My issue is when I get to some longer grass the blades stop spinning. When I disengage and re-engage the clutch on smooth ground the blades take a bit to start...

In my country, a good wife is most important. Then you will be happy forever.

AliExpress, Chinese carbs are 1/10th the price of dealer here. NZ.

Seaweed raises ph.

Yes correct. Thanks for the advice, I will indeed. On to the next one.

Pic

I did it, made a plug from a connector block, used a wire to complete the connection loop. Charging at 14.5V. Saved $68. Cost $9.

My spindle wasn't exactly the right type but the bolt holes lined up, and I swapped out one spindle shaft with an original because the blade had a different star pattern. AYP Chinese spindles. Saved heaps of money replacing them myself. If you knock a shaft out leave the nut on so as not to...

Thankyou

Found. Part 790544, adaptor wire harness.

Wow, the information is all there. Alright.

Thankyou

Yes

Exactly right. Cheers.

Haha, the Man, thanks Auto Doc.

You got it, thanks for the url. No pto.

Amazing knowledge, thankyou kindly. Yes I was complaining about the interconnect harness. Stay on.

I am trying to find a voltage regulator for my riding mower. I have a Briggs 13.5hp ic engine. I have added photos of regulator with plugs. Finding the plug is the hard bit. I have added a pic, but I'm not going to pay $50 for it. Otherwise I'll just rig up my own. I have tried a regulator from...

As a side, there is a great range of experience here. My guess would be with the faulty safety switch. Those experts who contribute, my basic understanding is improving. All the best Mr88.

Tried it. Didn't work. Reckon the can has slipped. Saw it on a video, plastic cams. I know the mower runs, but doesn't start.

Many thanks, I will do this. You are a real guru.😄

Have a Briggs DOV engine on a Victa. This thing won't start. I've cleaned the carb with ultra sonic cleaner. Replaced spark plug. Re gaped the coil thingy, adjusted valve lash to spec. Replaced air filter. The only time I can get this to start is with a spray of carb cleaner. The mower runs...

Interesting post, could a safety switch be killing the electric circuit and preventing the mower from starting. I will remember the tip about removing the kill wire.

Cheers mate, really appreciate the feedback. That picture is the one I reckon, we have some progress 🙂

It's no problem, I think I can put it back together without instructions. Good to talk.

"532 18 03-54" Clutch Assembly. Poulan pro, Model No. PP16H36RB (96061015701). Does anyone have the parts diagram for this clutch assembly? My one I bought was in pieces, and I am trying to put it back together.

What I did was replace the carburetor and spark plug. Also the engine is old so I cleaned the fuel tank. The surging problem still exists but my mechanic said they will do that. I would give it to someone with experience in these areas. Good luck.

There was, I thought there was an air leak. But I am wrong.

Does anyone have one of these plastic rings around the intake to the carb. I took mine off and replaced it with a o ring. No more air leak. Mower running perfect.

Does anyone have one of these plastic rings around the intake to the air box and carb. I took mine off and replaced it with another o ring. The mower runs perfect. No more vacuum leak.

Maybe the flywheel key is broken and the engine is miss trimmed. Great video I can hear the miss. Man how annoying are those things you can't fix.

My mower does the same thing, I cAn see the governor spring is old. I might get a new one. Not bad for free engine. BS 125cc, looks like yours with plastic everything.

Fixed, see photo

Thanks