Search results

Results 1 to 7 of 7
  1. M

    Laser 72'' leveling

    MParr Thanks!
  2. M

    Laser 72'' leveling

    Finally, received my new front wheel fork, got it installed. Leveled mower deck per instructions and mows nice! Next I have a left leaking wheel motor. Where should I get them and what will they cost? I think I will replace both sides at one time? Thanks Matt
  3. M

    Laser 72'' leveling

    Well, Closer inspection last night, my right front wheel fork(I don't know the proper term) is bent and has been welded and some grinding done on it, I have ordered a new one and will install when it gets here and continue with the deck leveling. Matt
  4. M

    Laser 72'' leveling

    Well, I guess better run it through again tonight and see what I missed. I report back. Thanks Matt
  5. M

    Laser 72'' leveling

    Rivets, Never really measured deck height after I was done with leveling, checked blade level from front to back, but deck has to be at least 1 1/2 to 2'' lower in the front.
  6. M

    Laser 72'' leveling

    Yes, this is what I used! Tire pressure at 13 psi. All scalp wheels remove and 3/4 block put under brackets. On the best concrete floor I have and checked the floor with a 4' level. Any suggestions? Just about 3/8 low from the front underside of the blade to the back underside of the blade. Hope...
  7. M

    Laser 72'' leveling

    Hello, New here to this forum. Just purchased a 2007 LAS28KA724 and also my first zero turn and a rookie on these. I have leveled the mower deck per the manual, but the front of the mower deck is way lower then the back. With all the scalp wheels off it's not a 1/2 off the ground. I...
Top