Search results

Washington, December 2, 2022 One thing I have learned with this whole Biden adminstration if the Dems are accusing the Republications of doing something they are the ones doing it.

Don't see any single Hondas on riding mowers they make a really good GX series horizontal engine GC engines are so so..

We already have the laws present adminstration just refuses to enforce them.

Those are not the kind of people I am concerned with. It is the criminals that these countries are sending into our country. They are empenting their prisons insane assylums into our country. 300,000 illegals crossed into our country in the month of December alone. Congress is bringing articles...

I don't have a problem with legal immigrants. It's the illegals that are killing our country. The Dems want them because their policies are ruining our country and they are loosing their voter base, They want to make it legal of illegals to vote and the more they are the more congress men there...

If an American citizen lies to congress that is a felony and they can get jail time. If a member of congress lies to the American public nothing happens. Not the way it should be. I don't think politicians should be able to make up lies about an oppoinent.

If they threw them out of office there would be no politicians in Washington. If Bidens lips are moving he is lying. Look what they are saying about the border. The Border is closed? That is why Abbott is putting up more fencing on the Border. Biden sued Texas and the Supreme Court said they...

Have you thought about a new mower you might buy a new one for a little more.

To me the best sources of energy are hydro electric and necular.

Two things come to mind. Air bleed that is stopped up or a porosity in the body of the carb allowing it to draw more un metered fuel in to the cylinder.

What kind of superior after market gasket is better then the OEM gasket? I personally have never had an OEM gasket fail.

At what rate? Tn pays 27.4 cents per gallon Energy T.C.A. § 67-6-206(b)(1) also provides that a “tax at the rate of one and one-half percent (1.5%) shall be imposed with respect to gas, electricity, fuel oil, coal, and other energy fuels when sold or used by manufacturers.” T.C.A. § 67-6-704...

Yes it was a problem they also has a cam issue the compression release stop on the cam would wear off over time and make the compression rease not work. It would kick back and make an awful noise. once they fixed all that they had a counter balance problem. I have seen them break, knock the...

They listed a different serial number as well. Go to parts tree and on the starts page click on see all brands click on CC and utility vehicles and scroll down until you find the model and serial no you want. It is toward the bottom of the list.

https://www.partstree.com/models/volunteer-46e-efi-37am46ed710-cub-cadet-4x4-utility-vehicle-sn-1i018g-1i019g

Do not try to jump start it or charge the battery without disconnecting the battery. It can cause a voltage spike and blow the ECU. Over $800.

Yes that was a problem in the early days for the auto industry but the thing about it was you could carry cans of fuel with you. Trouble with EVs is you can't carry spare batteries with you. There aren't enough charging stations around and the infra structrue is not able to support the addition...

Kohler command twin with 2 cam housings? Never saw a Command twin with 2 cams. Only twin cam Kohler was the single Courage. It had an issue with cracking the block where the cylinder met the block because the top plate bolts worked loose. You might have had a twin Cam single cylinder Courage. I...

We survived the night no frozen water. Kept the water dripping all night. High today around 30. It suppose to be up to the 60's by the end of the week. Say warm and be safe.

Been there done that.

We aren't over it yet here in north middle Tn calling for 1 degree tonite. Then slowly start to rise over the next several days and up to near 60 by the weekend.

The JD Scotts mower was probably built by Murray.

Do any of you guys have a minimum amount you charge for repairs? Local JD dealer charges $100.00. Co-op $80.00. Trying to decide what to charge.

Just took my little dog out to do her doggie stuff. Glad when they built this hous they put a 2 foot over hang on the roof. This leaves a mostly 2 foot trail next to the house that is mostly clear where we can walk and not have to walk in the snow.

My thermoniter says it is 4 f roads have been scrape once and they layed down brime on Saturday. I know because I got behind the truck and had to go and wash my SUV to get it off. Just glad there was one open. Have not been out since and not going till it clears. Not going to drive an hour to...

We do a PDI pre delivery inspections on all the mowers we sell and set the Top no load speed on all out mowers.

Boss was approached by Sears to do their warranty work. He was all hiped up do it I took a look at what they paid for warranty work and told him I would not work for that. We don't do Sear warranty work. They were going to pay about 1/3 of the time it would actually take or even less.

Kohler warranty pays 1.8 Hours for both gaskets. Don't just replace the gaskets plane the heads as well. This is on verticle engines. Just did one that had to take the engine mounting bolts out and lift the engine up to get the muffler off. Clean up and all that 6 to 8 hours

Take your pick there only two manufactures making lawn tractors now. Husqvarna and MTD now Black and Decker Stanley. They own MTD, Cub Cadet, and Excel that makes Hustler and use to make Big Dog until they bought them out. Base models Run over 2K.

Kohler Command is the best single engine on the market. Too bad they quit making them. They just don't tear up. Biggest problem is carb issues and most of that is due to sitting with fuel in them too long gumming up the carb.

How long does it take you guys to do head gaskets on a Kohler command twin engine. I do both sides when I do one.

I don't see blown head gaskets on the Kawasakis or Kohler singles. Kawasaki has a valve train problem. Only see it on the older Kohler twins now.

Both of the failures are due to a poorly designed engine. Nothing to support the end of the compression relief and too much space between the spacing of the head bolts in the valve train area. Though I see more cam failures than head gaskets. Still a bad design. Can't say too much for the Kohler...

Here in north middle Tn it is 24 degreese and snowing could get up to 2 or 5 inches tonight and more tomorrow. Lows could be as low a 4 degrees by the middle of the week. Burr hate cold weather but thank goodness for global warming. Hate to think what it would be like if it wasn't for that. LOL

My sister has an old chest type freezer that was bought in the early to mid 60's and is still working.

Looks like it has a compression release due to parts break down. Take the valve cover off spark plug out and turn the engine over by hand. Watch the valves and see if the bottom valve bumps open just before TDC. If not it has a bad compression release.

Worse problem generators have is gunked up carb from setting with old fuel in them. People buy one put fuel in it run it one time let it set until they need it again. Two or three years later they expect it just to start right up and run. LOL

You said old old Kawasaki engine if it is an FH series engine check the top main bearing to see if it is worn out. Turn the magnet on the flywheel away form the ignition coils and see if you can move the flywheel back and forth. Those old FH series engines had a tendency to wear the top main...

President Trump on Wednesday voiced support for confiscating guns from certain individuals deemed to be dangerous, even if it violates due process rights. “I like taking the guns early, like in this crazy man’s case that just took place in Florida … to go to court would have taken a long time,”...

What did it cost new? Looks like a 2018?

What is your problem?

It is a shame but the younger generation are not interested in getting their hands dirty to fix anything. I am 74 years old have been doing this for going on 48 years. I have done it both ways worked for someone else and owned my own business. When I ran my own put in way too many hours a day...

Those engines have a compression release on the cam gear. when you adjust the valves turn the engine over by hand and watch the vaves to see if the exhaust valve bumps open just before it hits tdc. If not the compression release is bad,

An tell me again what country you live in that makes you such an authority on the United States of America. Name the one crime Trump has been convicted of. All these charges are baseless false charges. Biden is the criminal in the White House. Selling the Biden Brand to China, Russia. Ukrain and...

Coke does not produce smoke on burning: Coke burns with an almost smokeless flame and does not produce smoke during burning. So, there is lesser air pollution when coke is burnt as compared to when coal is burnt. That is why noonshiners use it to fire their stills.

Like I said Dixie Chopper uses the Parker Torques Pack in their mowers and some of the other manufactures are as well. We have only had two units since 2017 that were defective and were covered under warranty.

A lot of the commercial mowers are going to Parker Torques pack one peice unit with oil drains in the pan and a cartrage type filter. It is a very good unit. Dixie Chopper uses them in their commercial Eagle and Black Hawk series and uses Hydro Gear in the Z2 units. They use the two piece units...

I know it was just saying it to controversial. Kohler uses them as well but have seen torch in them as well.

I use to be on a forum years ago and posted for my use I would not screw a Champion plug in a bucket of dirt.

Had a 1965 Chevy wagon that would not run long on Champions put Autolites in it no problems.