Search results

Thx Fish....sorry .....I didn't ask what exactly was wrong with the crank, but will do when I pick it up. I was just curious if the crank from a different model would fit, but at that price I guess the blower is toast! Shame, as it's been a great machine and in the last little while I've spent...

Hi guys....just to follow up....just got the call from the repair shop.....the crank needs replacing and apparently they are no longer made. Anyone any ideas if a crank from something else would fit? Thanks

Thx Hammer....lost patience with f%^$#ng around with it.....gone to the repair shop!! Enough's enuff!!

Thx Fish....I realise that...but don't understand why after a really thorough draining and drying this happens with such a tiny amount of gas? Should I take it into a repair shop....and if so, what can they do to prevent this happening again?

While I was trying to fire it up after drying, with no fuel in it wasn't yanking.

After I put in the squirt of fuel.....while I was cranking to dry it out with no plug in it pulled fine.....what else could be wrong?

Absolutely will not fire with a small syringe of gas put in.....and the pull cord is still jamming really badly every few pulls :-( Is there a next step, or is this now toast? I'm thinking there's something wrong with the crank.

Thanks Fish.....have done all of the above....emptied the fuel, took the plug out, and pulled the cord 250 times ( yes....I counted) over the course of an hour, and then left the machine upside down in the sun for several hours. Put the plug back in, no fuel, but the unit will not fire. Can I...

Whats the best way to get that out Fish? Should I take the machine apart? I thought it had fully dried out after I did the last draining.

Anyone have any advice or suggestions as to what I try next? I just don't understand why the starter cord is acting up even after the crank has been drained of fuel?

And the latest update....new plug installed,new carb. kit installed....won't start!!!! And still wants to bite me once in awhile!!!!

Just to add to the above...after breaking two woodruff keys last year I finally took it into the repair shop.....the flywheel was scored so it currently has a new flywheel and key....don't think these are the problem.

I have one other question....for the last little while before this incident every few pulls on the starter it would really stick and hurt my hand! Now, even with the fuel empty, when I put in the plug and pull it does it every few pulls....and I mean really jams! Any ideas as to what"s causing...

Born2Mow.....thx.....I've come this far so will be putting in a carb kit...and a new plug! :)

Thx wolfey01....going to get the kit as soon as I've given the unit a chance to thoroughly dry out....will then try it and even if it starts I think I'll go ahead with the kit. Appreciate the help.

Thx Fish....I'll take the plug out and pull a few dozen times.....then leave it overnight in the heated shop upside down. Then another try tomorrow I guess.

Thx fish...this actually what I did at the same time as I took the carb off....tried for several minutes to start it but no go. I think my next step has to be to take the carb off, give it a thoro cleaning and install a carb kit and go from there? I guess I should check the vent on the fuel cap...

wolfey01....is this what I need?

Slomo....just a visual check, and no, unit stored inside an insulated shop. wolfey...would it be a major job to rebuild the carb? I'm game, but have never done that before....some say cheaper and quicker to just put on a new carb but interested in what you think? Downside of a new carb is it...

So guys.....here's the update. Took the thing apart today and checked the fuel hose....nothing found. tried to start it afterwards and gas spewing everywhere again. Took the plug out and pulled the starter.....gas spewing out of the cylinder head plug hole! Cylinder head and crank full of...

Thx Hammer....haven't had a chance today but will check them tomorrow.

It fired up and ran and the fuel was leaking out while it ran.

Thx Fish....should I just replace the carb as I'm not that comfortable taking the carb apart? What do you think would be wrong with the carb? A stuck float or ??

Hi all, Just fired up my blower for the first time this year and noticed gas leaking everywhere. Have included a few photos and was wondering if someone could point me in the right direction to troubleshoot this leak. Should I disassemble the whole machine or....?? As you can see the lower...

Yes Fish....Stihl dealer. Thanks bertsmobile1....some good news is it's not neccessary. The shop came through for me and fixed it for free! They said the reason the blower was so hard to pull to start.....the pulling hard caused the key to break.....was that it was flooded and had a vapour lock...

bertsmobile1.....you're right! Shop was not happy to see the blower returned this morning....told my wife that now probably needs a crankshaft and it's probably not worth it on such an old machine!! I wish we had techs that could fix things instead o being just parts replacers:mad: Perhaps I...

Thanks Fish....but when you have a certified tech fixing the thing you'd assume he should know this, and I presume he followed the outline when he replaced the flywheel and woodruff key:)

Any idea as to what could be causing this continuing issue besides the flywheel/crankshaft/woodruff key problem?

My thoughts exactly Fish,,,but we'll see if they agree!

Hi Guys, Don't really know where to start with this....Blower went into repair shop, and it was discovered that the flywheel needed replacing., that was why it kept breaking keys.That was done and a new woodruff key installed....$200!!!....and it took 5 weeks due to waiting on parts. I took it...

Thx bertsmobile1 and fish, I tightened the flywheel on by putting a socket on the starter cup but....at first I tried wrapping the starter cup with tape and using a pump pliers to hold it while tightening the flywheel with a torque wrench. Pump pliers would not hold, so put a socket on the...

Hmmmm..... So I got the new Woodruff key and installed it correctly oriented on the shaft. It was definately in place as the starter cup turned as I turned the shaft. It was torqued to 18.5 ft lbs as per specs, reassembled and pulled to start.....guess what?....first pull the key broke...

Ok...so the two new Woodruff keys are in at the store...pick up tomorrow. Here's the thing...my torque wrench only goes down to 20 ft lbs.....require 18.5 for the flywheel nut....20 okay or too much? Yes....I know they are set for a reason, but I'm just curious if an extra 1 1/2ft lbs would be...

Thx guys, One more question....what's the best method to secure the starter cup in order to tighten the flywheel? Just another socket, or is there another method? Thx

BTW, I've heard that 1/2" torque wrenches are notoriously "out" quite a bit when set under 50ft lbs....any thoughts?

Thx guys, Bertsmobile1, I looked carefully with a magnifying glass at both the shaft keyway,and the flywheel.... can't see any burrs or marks. Waiting for the Woodruff keys....I ordered two this time!???

Hi all, After replacing the Woodruff key detailed above, the machine would not start. After two days of trying everything, I heard that familiar sound while pulling the cord....the key had broken again!!! Does anyone know what torque the flywheel nut requires, and is that maybe why the key broke...

Thx....air filter clean, fuel flowing and spark....yet now it will not start at all??

Thx Fish....yes, thats possible but I'm now thinking that when I wsa working on it it was horizontal so I'm wondering if some oil has seeped into the cylinder and thats the cause of the smoke? It appeared to be coming form the exhaust. I'll check the flywheel nut

So...the latest update is after leaving it overnight, I used a spark plug tester to check for spark....the blower fired up and ran, but would not respond to the throttle, and after about 10 secs began to smoke!! Immediately shut it off, but now wondering what could have caused this? Is it...

Yes...in order to replace the woodruff key I had to take the fan and the flywheel off

Replacement key installed without issue....no parts left over:) EXCEPT....now the blower turns over fine, tries to fire once, but will not start? Anyone any ideas? Didn't touch anything else except to take apart and re-assemble?? Thanks for any help

Fish... Took the fan housing apart and found the fan really loose inside....the keyway was indeed broken in two pieces. Thanks everyone...problem resolved, as long as I can find a replacement keyway :)

Thx Bert and Fish, Bert...not that mechanical...can you point me to the rocker cover? Thx

Thx Fish, Maybe I should have said starter cup instead of flywheel...it was the starter cup I was turning that seemed to have a little compression and caused the piston to move. Where /how do I check the fanwheel? thx

Thanks Fish, Pull starter removed, flywheel can be turned by hand but some compression, and with plug out I can see the piston reaching the top of the cylinder as I turn the flywheel.

Hi All, I have a Stihl BR 400 blower thats almost 30 years old but has been running well. Last week it fell off the back of my pickup, but ran well immediately after. Today when I went to start it, the cord pulls with little compression, and something inside freewheels until gravity stops...

Hi, I have a craftsman wheeled trimmer that takes two sections of 18" 0.155 line. Suddenly the trimmer head keeps spinning whether or not the lever on the handle is engaged or not. Normally you have to pull the handle towards the main handle to engage the trimmer head, but right now the trimmer...

Thanks to you both for responding....have included a photo of the keyway and flywheel....I think this may be the problem. Can someone confirm, and if this is the issue, do I have to buy a new flywheel and key stock? Thanks for any help.

Hi, I have the above captioned mower with a Briggs engine..108-4841 seems to be the serial number, and it's listed as "easy start"!!!! It's always started well on one or two pulls, but recently it's become more difficult to start and finally now will not start at all. I've checked for spark...