Search results

Flip a coin. Champion likely makes the Kohler plug.

I wish that you would reconsider.

An expensive lesson learned. 😟 If the clowns at the John Deere dealership ever gets this straightened out, fire them and find a competent repair shop.

I think that you will be happy with the Grasshopper. I like the chain hung deck. Going by their website, it’s equipped with the Kohler Confidant ZT740. I have that engine on my Gravely and it’s been troubled free. Maintain the air filters as Kohler outlines in the engine manual. Get you some...

While you are looking, stop by the Gravely dealer and look at the Pro Turn 160. It’s equipped similarly to the Hustler Fastrac SDX.

It’s not. Texas Mesquite thorns are a big problem. The OP is going to need to contact a local tire shop or ATV shop and find out what they recommend.

The OP is talking about a Snapper riding mower. The cost would not be as steep on small tires. A new wheel assembly is around $100 each. I’m sure that there are local tire dealers who offers that service for small equipment too. He should call around and ask his local tire dealers about his...

I have a very large patch of St. Augustine and I cut it at 3”. It doesn’t hurt a thing. The grass is very healthy and fast growing. Plus, I don’t fertilize it. St. Augustine is the perfect southern grass for shaded areas. I did see where the University of Florida recommends cutting Floratam at...

Three inches is the normal cutting height for St. Augustine. Most any riding mower can be set to cut at three inches.

That might be true. However, that’s what went in every tire of the tractors that pulled our county roadside mowers (15’ flex wing and 7’ rotary mowers). Tractor tires are more expensive than the fill.

This is the stuff that I was talking about.

Does it really matter? The OP isn’t using it as a lawn mower. He’s using it as a hauler/ATV. He’s worried about Mesquite thorns. When he wears the tires out, he can replace the entire wheel assembly. Some tire shops offer polyurethane tire fill for ATV, lawn tractor, and zero turn tires. I have...

I’m not talking about fix-a-flat. I’m talking about spray foam insulation. There is also a special rubberized filling that is sometimes put in agricultural tractor tires. https://carlisletyrfil.com/

Cutting tall wet grass contributes to plugging. I doubt that mulching blades will give you any benefit. It may make the problem worse.

You have just found yourself a good repair shop.

We can now proceed. If you don’t have a tachometer, get one. There are some decent digital tachometers to be had on Amazon. Get one that has an alligator clip on the end of the wire. Set your high idle at 3,600 rpms, with no load (PTO Off). Set low speed idle to specifications. Set your governor...

What do you mean when you say that you don’t mow at high speed? Do you mean ground speed or engine speed?

I didn’t say that. The original lasted several years. It’s replacement didn’t last that long. For the price of a new one, it’s better to replace it. I just wasn’t going to do it again and opted for a better system.

I certainly had problems with the one I owned. The transmission costs anywhere from $80-$100.

Personal Pace transmissions are throw aways. Buy the whole assembly and be done with it. I owned one and hated it. However, it did mow fairly well. I replaced the transmission once and a year or two later it needed a new one. Nope, I wasn’t doing it again. I moved up to a 21” Snapper Ninja...

If you think that’s too much mower, you can move down to the Bad Boy Maverick HD 60. It has the same ZT3400 transmission as the Scag Patriot and it’s still heavier built than the Patriot. https://badboycountry.com/mowers/maverick-hd

Good value.

That’s pretty tough too.

Most conventional oils are now semi-synthetic. I use either conventional 10W40 4 stroke motorcycle oil or conventional 15W40 diesel oil, whichever is cheapest. No, it doesn’t consume oil. It’s got around 255 hours on it.

No! In fact, the kit contains 10W50 Synthetic oil. Still a no. I have the same engine. The operators manual states every 100 hours or yearly, whichever comes first. I like 10W40 or 15W40. A FRAM TG3614 is adequate for the oil filter. Make sure that you follow the procedures for air filter...

You can get a Bad Boy Rebel 61” for the same money as a Scag Patriot. The Rebel comes with a Kawasaki FX850V engine and Hydro Gear ZT4400 transmissions. The Rebel is way more mower than the Scag. It’s heavier and is built stouter. This is a true commercial mower. WC Tractor in Brenham, TX

The blades with two holes besides the center mounting point can be used for 21” or 22” push mowers. They are designed to fit on the blade adapter.

Toro Gravely Exmark Bad Boy Look for something with ZT 3400 minimum and 25hp. I cut 3 acres weekly and have a Gravely Pro Turn 260 with a 25hp Kohler and ZT 5400s. You would be best served with a 60” entry level commercial mower or better.

If Scag is your choice for 5 acres, the Patriot 61” would be the one to get.

How is the tension cable?

It probably is 25mm. Did you measure with a micrometer? 25mm is 0.016” less than 1”. I had the same mower and it was equipped with the B&S 6.75 190cc engine. It doesn’t matter if you buy an engine with a 7/8” shaft, as long as the shaft is the correct length. All you will need to do is change...

Are you sure that’s a 1” diameter crankshaft? 25mm is just short of 1”. 25mm = 0.984”

Make sure that your pickup and return fuel lines are connected correctly.

.

Go to YouTube. “Taryl Fixes All” did some extensive testing on such products.

https://www.goldeagle.com/product/sta-bil-360-protection/

You sometimes can’t see stuff like that in tall grass, weeds, and rushes.

Your saw looks very similar to my Poulan. The coil has been a major issue with mine. The way the top engine cover is designed can pinch the plug wire. You must be very careful and be sure the plug wire is tucked away inside of the cover before tightening all of the screws down. Also, the...

Back when I was operating a boom mower, there was all sorts of things hidden along drainage canals. I would have to say a mattress was the worst.

Have you looked at the wiring? Any chaffed wires? A sticking safety switch? Have you checked the air gap on the PTO clutch?

Never assume such things. I have yet to own a mower that was properly prepped before my taking delivery.

That should have been the second thing done before cutting. The first thing would have been to check the oil level.

Have you even checked to see if the deck was leveled as the operators manual describes? The cutting height selector will not necessarily match the actual cutting height.

Some Snapper mowers use the same deck shell. It may be worth looking into.

The mulching kit will kick up more dust. Check and see if the deck is leveled according to the manual.

Did you remember to turn the PTO switch off?

I was thinking the same thing.

Good deal. The Scag parts diagram doesn’t show a spacer. There is just a 7/16” bolt, flat washer, and lock washer.

What type blades are you using? Gator blades in tall wet grass are the worst.

Shindawa/Echo makes a Speed Feed 400 Universal kit that might work. https://www.amazon.com/Shindaiwa-78890-30000-Speed-Feed-Universal-Trimmer/dp/B00DRNIZ2C