Search results

The rattle is likely metal rubbing metal or a belt that may not be tracking properly due to assembly issues. It will probably not be a serious issue but it could be the beginning of something that will become a bigger problem later. If the dealer is aware of the problem, he should be able to...

The big box store ZT's are not as horrible as some posts claim, if you use them as intended. For 1-acre mowing you are going to be using it for 1-1.5 hrs each mow. I you do what maintenance is recommended they will perform for you for quite awhile. I would avoid the new battery powered units...

Part of the mystery in choosing a new ZTR is because there are not a lot of differences you can spot at first glance. They all have a motor, a deck, and a drive system. Sitting on one is not all that much different from another, if you are comparing entry level models to entry level models and...

Thank you both for your replies. My Briggs motor is NEW ( purchased new mower last August so I doubt it's been modified) From the reply's it's clear I'm wishful thinking that I can run a 17 amp pump and not risk damage to the Briggs electrical system. I'm over my head here so maybe a safer...

I double checked the Briggs part number ( my paperwork was wrong). the motor tag is 44T9770005G1. I took a look at the DC regulator and spotted 2-yellow and 1-Red wire. Guessing it's a 16 amp system ( base on your attachment) . What would happen if I hooked it to a 17 amp pump...

I need to replace the pump on my Fimco 25 gallon tow sprayer. I currently have a 3 GPM pump that pulls about 10 amps. I am wondering if I can use a 5 gpm pump but the amps use is 17 amps. I have a 2021 simplicity ZT with a Briggs 25HP commercial/turf motor 44n777-0005-G1. Will the...

2-good choices to pick from and there are others out there as well. I have owned several Simplicities and John Deers. I think Simplicity offers a better deck overall. Depending on the model mower, I think a Simplicity deck is easier to level, easier to remove and reinstall. They also provide...

If those stripes of taller grass are left from you coming back in the opposite direction from the previous pass, it would seem to be a tilted deck and a level issue. If they are all from going in the same direction it could still be a level issue. Are you measuring the deck or the blade tips...

I would also suggest you verify the deck pitch and level is correct. If you have the correct blades, and the correct tire pressure, then the only thing left is air flow. Air flow is controlled by the deck being level and the front to back pitch is correct.

put it back to normal. You will never forgive yourself if your wife, kid or grand child gets hurt when you are not around or busy doing something else. And if someone gets hurt the liability factor can be overwhelming. Now that you posted your question there is public record of you wanting to...

can you drop the deck down on to (4) 2 x 4's ( one in each corner ) to check to see if the deck is twisted or bent? If it's twisted one corner will not make contact with the 2x4.

Those units came with a mid-range setting. Your are suppose to have threads in the adjustment left over for minor correction.. You are at the extreme end with no threads left tells me you need to take the deck off and start over. You have something wrong in the mounting. You never should run...

Several good choices out there for replacement mower blades. If you are wanting a Gator G3 blade, I assume mulching your grass is a goal. My experience with Gator blades was great, in they cut very well, stayed sharp and had additional lift. The down side is they really pulverize the clippings...

There are a lot of used ZT's and tractors listed on Facebook Market Place that are in your area that should meet your performance requirements and fit your budget. Craigslist might work out for you as well.

If you are set on the Kubota Z231, you might want to reconsider the 48" deck as it will give you a wider trim capability thus less rutting in tight spaces.

I do not have my 2019 Conquest any longer but I remember a time when I took the deck completely off ( it's a beast ) and then reinstalled but in doing so I noticed I could accidentally get something in the linkage flipped. ( at the rear of the deck... don't remember more detail) but from what...

What about a front mount Walker ZT. Might be worth a look! Lots of features.

I would recommend you go to 4 or 5 different models and take a look. There are differences that become more obvious the more you compare models. Think about the little things that make a difference in comfort and reliability. Is the plastic going to hold up? Are the controls easy to locate and...

you might be benefited with the addition of a de-thatcher to pull the dead material loose so it can be swept. Or you could consider a plug aerator and just pull plugs and let them decay and go back into the soil as they do.

It's impossible to help you with so little information provided. Explain what happened in detail and provide make and model numbers and someone may be able to give you some direction.

I can tell you my Simplicity Courier XT which is a Ferris 500S with orange paint is a fine machine and works well for me on my 1-acre property. It cuts great and is easy to maintain. I'm sure a 2200 is a better built machine with more features and built for to take more abuse. Good luck.

It sounds like it was all about the belt routing. somehow it must have been installed incorrectly. There should be a belt diagram available on-line or from one of those dealers to look at.

For my Simplicity, I just went to Home Depot and bought a small piece of flexible aluminum....cut to size and made a bend...and attached with 2 L-brackets. took 1/2 hour.

Talk to your dealer and order a correct replacement switch. Don't go looking for trouble. Someone else is depending you doing the right thing!

Reverse awareness is certainly a valid talking point. I can see the need of a ROI switch due to the added safety but make the switch more convenient to use. I question why no one has installed a chirp sound when mowing in reverse. A chirp would give any nearby people, kids, or pets a warning as...

Those new Ryobi Electric battery powered units look interesting. Very simple design indeed. I question the build quality......will they last very long with normal use? The construction seems a little light and it may be fine for flat manicured lawns but 1/2 acre and up, I'm not so sure...

I doubt while running at full throttle while mowing you would ever know the difference unless you were mowing very overgrown grass or field. More hp would allow for a larger deck if needed. But over a 10-year ownership the $800 is only $6.66/month if you look at it that way.

If traction is not a issue for that sloped backyard then a ZT will be fine. If you have a lot of trimming then a 48" is better than a 42" as you navigate the turns the deck will clip the grass beyond the wheel base. If your yard is wet most of the time a ZT can leave scars from the rear wheels...

Bad manners do not warrant more bad manners. Have a nice conversation over a beer or a ice tea and let him know your thoughts.

probably 50-60% of new price. much more than that I would go with new every time.

good luck with your new Cub......I mean that in a nice way.

This is just my opinion but I would be hesitant to purchase a Cub ZT2 machine. Looking at them at my local HD and at a Farm Ag store nearby, I see some good and some Bad. The Bad is what is going to hurt you down the road. By Bad, I am referring to the cheap construction and short cuts and...

If you know exactly where the property line is.......just position a couple of big rocks on the lot line and mow up to the rocks each mowing. He will catch on! After he does remove the rocks.

That Ikon XD looks pretty sweet. She will probably love it. Good luck with you new mower.

Take a look at the John Deere X590 or the Simplicity Conquest to start. They would be stable on the hills and both offer traction control for those moments when having both rear wheels drive is necessary. A zero turn may not be a good candidate due to the hills.

Recheck your owners manual. There should be instructions on how to adjust ( balance ) your forward movement using the lap bars. It's possible your not getting lap bars to the the full forward position.

I have read more then one owners manual, to have the front blade tips lower than the back to prevent double cutting. Even so.....to have the blade tips exposed just sounds very dangerous and likely a big liability issue. it's hard to believe that a manufacturer that installed a ROI switch for...

Leveling the deck side to side and front to back moves the entire deck and all 3-blades. A front to back adjustment should change the height of all 3-blades. I can't imagine a blade would stick out below the deck by design. It sounds more like the middle spindle is installed incorrectly. Since...

Thats probably your best approach. In effect flush it out several times. If you remove the filter, you are going to get most of the old fluid out. With the filter out, adding more fresh fluid may flush it out further, or pop on the new filter and refill with fresh fluid and run for a few...

The Snapper 360 is made by Briggs & Stratton ( parent company) and is a shared design with Simplicity. The Simplicity Courier is built like the Snapper 360 but with the added rear deck roller that aids in lawn striping. Both are good choices in the under $4 K range and will probably serve you...

I read on these forums that you need to use a name brand bearing ( not Chinese if you can help it ) and that if you purchase a sealed bearing you can remove the seals so the bearings can be lubricated as you add grease to the spindles thru the grease Zerks ongoing. Am I correct?

Sounds like a fun project ( especially when you get good results ) . It's funny how one thing always leads to another but over time you gather enough skills and wisdom to tackle those unexpected challenges. Good luck on those spindle bearings. Are you just replacing the upper and lower...

is the deck level side to-side? Is it pitched front-to-back? Look at your manual for proper level and pitch instructions.....it may help. Also double check the air in the tires and set to factory specs. You may just need some tweaking. Or perhaps a different blade with a higher lift.

If you have replaced every part for the steering, there is nothing left to do!. What did you do? What did you skip?

Striping will be more noticeable with taller grass, thus you may be cutting your grass too short. If you can add a striping roller or some other device that will follow the terrain you will have more success. Some have had success with factory made striping rollers or DIY roller assemblies...

I probably would not purchase a JD D100 or any other entry level unit as they would not hold up for me but they are just fine for some home owners that have the need for a rider and/or can't use a walk behind for many various reasons. That being said......it probably does not have a JD motor...

Typically .......moderate fertilizing in the Spring as the grass comes out of dormancy ( 50 degrees ground temps or higher) .........very light fertilizing if any during the very hot months........heavier fertilizing in the Fall after cooler temps start. It depends on your soil, your type of...

In comparison, what else have you found that is comparable for $ 1250?

How flat is that 10 acres? Any hills, berms or ditches? Any ponds or waterways? How rough is the property? Any trees, rocks, roots, gates or other obstacles? A ZT is likely to be a faster mow, but a Tractor may give you better traction and the ability to do other tasks. You can probably get...

What type of grass? Any hills or berms ? Any ditches or culverts? What towable accessories would be needed down the road? Any gates? 4K will get you into the entry-level units but 5K might get you into a mid-range unit and you might need it depending on some of your answers. Simplicity...