Search results

there was wear on the inside when I took it apart, and it definitely was harder to start when I didn't have seafoam, much easier to start and fires right up on the first pull

amen to that ;)

well, none of the above were the problem if you can believe it! before I was working on this, I put seafoam in the oil as directed, and looked up a few videos of what happens when you put seafoam in your oil, the white smoke was just carbon buildup burning off in the engine! after 5 minutes of...

Murray Briggs and Stratton 5HP Quantum Power Push-Mower blows white smoke and barely dies down after startup, I think the carburetor setup is messed up but I can't find any sources showing the carburetor diagram. Any help is appreciated. MODEL TYPE. CODE. 124702-3106-01 92042759 Lanerdude9

just look at how many people have the knocking problems: https://lawnmowerforum.com/threads/kohler-courage-v-twin-knocking-sound-when-cranking.67170/#post-415881 https://lawnmowerforum.com/threadloom/search?query=kohler%20courage&tab=3963 and many more to come :(

the new Kohler aren't like the old shaking ones, one life lesson: NEVER BUY A KOHLER COURAGE ON ANYTHING, but the command is a much better engine, courage engines make an unending knocking sound and have lots of problems to be addressed ;)

Murray Briggs and Stratton 5HP Quantum Power Push-Mower blows white smoke and barely dies down after startup, I think the carburetor setup is messed up but I can't find any sources showing the carburetor diagram. Any help is appreciated. MODEL TYPE. CODE. 124702-3106-01 92042759 Lanerdude9

champions also seem to have a higher heat range, but get hot quicker on my engine, probably because we are go-kart tuning it so it will be at full throttle a lot of the time when we accelerate :)

different socket sizes to turn, and bkr insulator is thicker and heavier duty.

ok, for me the most common sparkplug is champion H10C, I have quite a few JDs with those shakin' kohlers hahaha

bro, you smashed him, great job defeating this scammer

what brand of sparkplug do you prefer to buy? i have decided to do an outer rebuild of the engine.

hahahahahahaha

ok, thanks

also, how would be the best way to clean the reusable foam air filter? water didn't seem to do anything.

it absolutely did, and it's very surprising that it started too... weird

yeah, so this afternoon I cleaned the air filter, re-gapped the sparkplug which is SUPPOSED TO BE 0.030, BUT WAS AT 0.060, and shot a bit of seafoam deep creep into the needle hole, and this thing... ok, I start it right up and immediately notice the difference of tension in the throttle, and at...

ok, I cleaned the air filter, re-gapped the sparkplug which is SUPPOSED TO BE 0.030, BUT WAS AT 0.060, and shot a bit of seafoam deep creep into the needle hole, and this thing... ok, I start it right up and immediately notice the difference of tension in the throttle, and at full throttle, this...

possibly...

i found the manual: https://bsintek.basco.com/BriggsDocumentDisplay/default.aspx?filename=msotJP-K_ny7tH217FzoPu

yeah, those are the exact ones, why?

ok

thanks scrubcadet10, but those arent the right muffler for it, but I found a replacement

oof, ok

my 5 HP CRAFTSMAN edger engine has a crack in the muffler and is crazily loud, this has been a problem ever since I got the engine 1 year ago. Is there a way to seal the crack without buying a new muffler? would super glue work or gasket sealer? engine serial code: 100202 0015-01 6811127...

ok, so after 30 minutes of long, hard searching the engine, I finally found the dust and dirt-caked engine serial code and model number for the edger! engine serial code: 100202 0015-01 6811127 craftsman edger model number: 536-83610

i couldnt seem to find one but this is the exact same engine:

ok, haha

my 5 HP CRAFTSMAN edger engine dies on full throttle for some reason, this has been a problem ever since I got the engine 1 year ago. maybe it has something to do with the leak in the muffler? I have tried adjusting it and it still has the same problem, but ONLY on full throttle. I have no idea...

ok please do

to slomo above

could you post a picture of your carburetor?

photo 1(1).jpg 146.6 KB · Views: 8 photo 2(1).jpg 159.6 KB photo 3(1).jpg 130.1 KB photo 4.jpg 103.6 KB · photo 5.jpg 172.4 KB

1. yes 2. new to me but used 3.ok 4.no so that is is easier to start .

thank you got it started, although I have another problem, feels like its running lean, do you know the correct carb adjust meant? only runs on choke and on fast throttle it shuts off. Thanks

hi

MODEL ___ TYPE ___ CODE_ 90212 ___ 0216 01 __91120503

yeah hasn't ran in a few years or something, just inherited it

MODEL ___ TYPE ___ CODE_ 90212 ___ 0216 01 __91120503

oh ok

ok

how do I figure out if its hydro locked?? I'm all new to this stuff

how do I fix a hydro locked engine

MTD edger with a 3 hp briggs, how do I fix a seized briggs?????? very hard to pull. idk why it seized? the cord pulled fine yesterday.

MTD edger with a 3 hp briggs, how do I fix a seized briggs?????? very hard to pull.

online