Search results

Results 101 to 109 of 109
  1. V

    Duraforce oil seals

    Hi there Lawn Boy guys. I have a question about the crank seals on a Duraforce engine. Is the bottom oil seal different than the top seal? I was looking on the Lawn Boy Master parts viewer and it shows no. 4, part no 611396 for the top seal with a (2) behind it like it would take 2 of these. I...
  2. V

    Tecumseh surge problem

    I have a snow blower about 10 years old with a Tecumseh 8.5 hp engine. Last fall when I tried to start it, it surged too bad to work right. I took it to my local repair shop and they cleaned the carb. When I got it back it still surged some but I was able to still use it. I recently started it...
  3. V

    Drilling out jets

    Hi guys. I'm fairly new to this forum. I have read some about surging and running lean engines. I guess when you say drill a nozzle or a jet you drill down into the jet, opening the hole a little bigger. Do you ever drill out the little holes that run cross ways in the jet? Also do you just take...
  4. V

    Kawasaki carb bowl

    Hi guys, I'm new to this forum. I am winterizing my Hustler Fastrak. I ran it out of gas and took the battery out and brought it inside. I know there is still some gas in the bowl but I wasn't sure how to get it off. It has a Kawasaki FR651V engine. Under the bowl is a metal cap with 2 wires...
  5. V

    Change tiller belts

    I just got an old troy bilt tiller model TH 1002. I think it is mid to late 70's with a cast iron Tecumseh 6 hp. engine. When I was trying to do some tilling, I had to hold down on the long lever that engages the tines or it would keep popping up and the tines would stop turning. I adjusted the...
  6. V

    Deck swap?

    I have two mowers that look identical. One is a L21ZPN and the other is a 7073. They both have steel decks and I believe they were both built in 1987. One deck is rusted so bad over the front staggered wheel that it won't hardly support the wheel any more. I have been looking for a used deck but...
  7. V

    model 10304 self propel problem

    I got a free lawn boy 10304 silver series. It was leaking gas and I got that fixed. I sharpened the blade and took the muffler off to check the exhaust ports. They were clean but i couldn't get the tapered blade plate off. I used a lot used PB blaster and a hammer and a puller but it just bent...
  8. V

    float adjustment

    Can anyone tell me if you have to adjust the float or just just put a new one in and be ok. I replaced the float and needle and seat on a lawn boy v series carb, but it still leaks gas out the filter breather box. Its a model 10304. Any help would be appreciated.
  9. V

    Walk behind lawn boy carb leaking

    I just got a free lawn boy model 10304. It leaks gas from the air filter box. The float was cracked into, so I thought that was the problem. I cleaned the screen filter and sprayed everything with carb cleaner. I replaced the float and put in a new needle and new seat. Put it back together and...
Back
Top