Search results

Results 101 to 150 of 500
  1. ILENGINE

    Hydraulic System

    Skippy you will be fine with modern oils. Oil designation are backward compatible, at least for engine oils. Not so much for gear oils in some cases. Also as long as the main unit is full of oil, the reservoir is just an overflow for efficiency loss. Meaning the hydrostat system operates...
  2. ILENGINE

    Locking up

    piston down 1/4
  3. ILENGINE

    Locking up

    1/4 inch past dead center on power stroke. Both valves closed. The idea is to bypass the compression release when adjusting the valves. But most people will rotate the flywheel to one valve is open and adjust the other valve.. Rotate the engine to open the opposite valve and then set that...
  4. ILENGINE

    Locking up

    Lets start with the engine model type and code so we can see what engine you have. At this point we don't know if you have a flat head, OHV, OHC, or some new fangled aerospace valve system.
  5. ILENGINE

    Briggs & Stratton 6.0 Horsepower Engine on Craftsman Wheeled Weedtrimmer

    Lets start with the actual model type and code from the engine. So we know what variation of engine you have. At this stage we are just guessing what ignition and kill system you have.
  6. ILENGINE

    Only slow speed

    The springs do iappear to weaken overtime. A new spring may fix things, but the truth is it could be a combination of things causing the issue. Belts can do weird thing, wear on the stack variable pulley groove cause cause issues on how the belt rides in the groove, and then spring tension...
  7. ILENGINE

    Cub Cadet deck belt

    XT2 is just series number that can include several different mowers within that series. So please provide the model and serial number from the tag under the seat.
  8. ILENGINE

    Only slow speed

    That is the spring. Also something else to look at. The variable speed pulley grooves can get worn and basically act as a speed limiting factor also due to belt hanging up in the worn areas.
  9. ILENGINE

    Leaking crank seal

    I will almost take bets on the crankshaft in the sump bearing area being no longer round
  10. ILENGINE

    Vertex 60" destroys deck belt and tension bracket out of align.

    Lets start with the actual model number of the stand on mower so we are not left guessing when it comes to obtaining parts diagrams to see actually what you have. pei It would be interesting to determine if the bushing in the idler arm is wearing causing the canting, or the idler arm itself is...
  11. ILENGINE

    Trailer

    MInimum would be a 6x10. The length is a consequence of the width. will need a 6 foot or wider trailer for the deck which a 61 inch deck will be closer to 72 inch with the discharge. My every day trailer that I use at the shop is a 7x14 dual axle with brakes on both axles. If you have...
  12. ILENGINE

    Only slow speed

    The tension spring that is associated with the engine to variable pulley would be suspect in not providing enough pull to keep the system working correctly.
  13. ILENGINE

    2002 Kohler 25hp Command Vertical Shaft Issues

    The question becomes when the engine shuts down, are you loosing spark, or is something else happening. Will need a spark tester to confirm lose of spark or not. If you are loosing spark then the SAM is suspect. And finding a good ASAM maybe difficult due to being discontinued in 2016. And...
  14. ILENGINE

    2002 Kohler 25hp Command Vertical Shaft Issues

    The delete with flywheel retrofit to the MDI ignition is the one recommended by Kohler for the CV25 engines.
  15. ILENGINE

    Repair or replace leaking hydro pump older Lazer z 60

    Also need to look at the charge pump cover itself. Is it cast iron or aluminum. If aluminum it will need to be replaced with the cast iron charge pump kit due to the aluminum cover warping which is what causes the leak.
  16. ILENGINE

    Only slow speed

    Could be the spring that tensions the belt on the transmission pulley could be getting weak, or the belt idler arms or the variable pulley slide is getting hung up and not moving freely.
  17. ILENGINE

    2002 Kohler 25hp Command Vertical Shaft Issues

    OP list 2002 in the title which most likely will translate to the CV25 engine with the ASAM. ASAM has been out of production at least 10 years, so finding even a good used one will be difficult, and the DSAM cannot be substituted.
  18. ILENGINE

    Only slow speed

    With the MTD variable speed pulley system both belts have to be replaced as a set otherwise things don't sync properly and will lead to problems. Also make sure the variable speed pulley isn't sticking in one position which will also limit your speed.
  19. ILENGINE

    2002 Kohler 25hp Command Vertical Shaft Issues

    The SAM and the modules should have a part number on them. That may assist is looking up parts and/or bulletins relative to your engine.
  20. ILENGINE

    Outlaw Extreme spindle bearing

    I always said we need to split our elected officials into 2 groups. The group we hang and the group we drown. I would say we should send that group to firing squad, but ammo it too expensive to waste on their worthless souls.
  21. ILENGINE

    Generic p-washer won’t restart after shutdown

    If you are loosing spark after running the engine, I would be replacing the coil since it sounds like it is experiencing heat sink failure. And the model and serial number from the tag would contain the info we need to assist with parts. Generac likes serial numbers for the parts lookups on...
  22. ILENGINE

    '18 STTll-61V-35BV Muffler

    Correct, Those engines don't come with exhaust. But for the 35 HP vanguard horizontal shaft you are basically limited to 3 mufflers The 846246 mid mount oil filter side discharge or the 845741 high mount starter side discharge and the 846154 high mount center discharge. Pick one that...
  23. ILENGINE

    '18 STTll-61V-35BV Muffler

    The serial number of your scag would assist us in looking up the correct version. But from what I am finding it appears Scag is suggesting that you need to use the muffler supplied by Briggs for that engine.
  24. ILENGINE

    Random dead miss.

    Have had plugs were you could twirl the ceramic in the metal shell. Also the ceramic is porous and since most plugs are slated more toward EFI systems anymore they no longer have a sealant coating. Therefore the ceramic will absorb gas when you flood the engine, and gas is conductive...
  25. ILENGINE

    Random dead miss.

    Nothing will make you pull more hair out then a champion plug. The only plug that used to list a 25% misfire within acceptable range of operation in their spark plug catalog.
  26. ILENGINE

    Fuel shutoff question

    Most likely it is 1/4 inch ID
  27. ILENGINE

    New deck belt not disengaging

    All appearance come to he has the correct belt. The issue with this style of mower is it uses the deck lift mechanism to also de-tension the deck belt by pulling the deck forward against spring tension to release the belt when the lift lever is moved to the very top position. Some of the...
  28. ILENGINE

    Leaking crank seal

    Generac engine
  29. ILENGINE

    X140 not charging

    According to JD that mower uses the 40N877-0001-B1 which uses the 592829 stator and 794360 regulator with the 5/9 amp regulated system Make sure you are getting battery voltage to the wire that connects to the tractor harness side of the regulator and make sure the ground wire for the regulator...
  30. ILENGINE

    Hydraulic pumps getting hot

    Not unusual for hydraulic oil to be 100 degrees above ambient air temperature. And with a hydrostat system they are not continuous flow from pump to cooler to tank. Depending on efficiency of the system most of the oil gets return between the pump and wheel motor multiple times before...
  31. ILENGINE

    Bolens BL110 String Trimmer starter rope does not recoil

    Some starters are available depending on the actual 41 model number. Some of those trimmers with multiple brand names were subject to the starter housing warping causing the recoil pulley to bind.
  32. ILENGINE

    Leaking crank seal

    Haven't seen it on that engine but have seen issues with the bottom bearing on the Briggs twin OHV inteks wearing funny allowing oil to leak when the crankshaft is shifted to the side.
  33. ILENGINE

    Hydraulic pumps getting hot

    Keep in mind that 15w50 used inside of an air cooled engines normally sees temps of 275-300.
  34. ILENGINE

    Briggs&Stratton Powerbuilt 3130, 344cc, Low power

    OIl pump driver. some motors use a supplemental oil pump which is driven by the cam. if you don't have an oil filter or provision for an oil filter on the side of the oil pan, then that part is not used.
  35. ILENGINE

    When a battery is really DEAD

    And that is the downside of electrical issues. You can spend hours and hours tracking down and repairing what in some cases us a minor repair that took half a day to find. Will spend part of tomorrow going through the wiring harness on a 2009 Yamaha 700 that a squirrel made the decision to...
  36. ILENGINE

    When a battery is really DEAD

    2.5-5 amp is roughly the norm.
  37. ILENGINE

    blade alloys?

    Lawnmower blades are kind of a metal art. Too hard and they are subject to harmony cracking leading to parts of blades that go flying. Too soft and the wear quickly do to the abrasive nature of mowing. Some blades have a Tungsten carbide coating on the bottom of the cutting edge to help...
  38. ILENGINE

    When a battery is really DEAD

    Most are in the range of 2.3-3.3 ohms.
  39. ILENGINE

    Briggs OHV on Troybuilt push mower

    Overfilled or mower being tipped in a direction that is allowing oil to enter the breather where it can flow into the air cleaner. Or engine is developing a major failure and has a ton of blowby, which could indicate blown head gasket or worn rings.
  40. ILENGINE

    Craftsman DYT 4000

    I was editing my post when you responded so may want to go back and look at what I added.
  41. ILENGINE

    Craftsman DYT 4000

    The bottom bearing in your electric clutch has seized and is now turning the deck drive pulley on the clutch instead of freewheeling. Since the bearing isn't replaceable will need to replace the clutch. Looks to be NLA from Husqvarna So will need to look aftermarket...
  42. ILENGINE

    K301

    And then after you get the spark issue fixed, then you need to concentrate on setting the timing.
  43. ILENGINE

    Cant ID drive belts old yardman

    The problem is your standard dimensions do not apply to John Deere or MTD/Troybilt/Cub Cadet belts because of unique width., depth, and cut angle.
  44. ILENGINE

    Gas tank venting on a 163cc Briggs mower engine

    The cap contains charcoal. They have since around 2003-2004 when the new emissions standards started kicking in. It was one of the first thngs that took place. And the vent may not be a hole. It could just be a loose connection between two parts that allows air passage.
  45. ILENGINE

    8HP Briggs Governor Shaft Leak

    Parts diagram suggest that one was used. Some engined didn't come from the factory with it installed. There should be a recessed area behind the governor arm for the seal to go into from the outside.
  46. ILENGINE

    Gas tank venting on a 163cc Briggs mower engine

    If fluid gas has entered the charcoal canister it turns it into a solid mass which basically requires the replacement of the cap.
  47. ILENGINE

    Gas tank venting on a 163cc Briggs mower engine

    Most likely the vent is in the cap which also has a charcoal filter canister built into it. So the charcoal could be gas logged, and basically bricked.
  48. ILENGINE

    Need help with wiring

    Wiring loom is the wiring harness. To @Kingcat MTD is not well known to provide wiring schematics for some for their mowers, and even in some cases don't provide the entire wiring loom aka harness. One some cases the negative cable was a separate item not woven into the loom.
  49. ILENGINE

    DGT6000 runs rich

    Similar discussion occurring here https://www.lawnmowerforum.com/threads/cv730-has-me-stumped.82047/
  50. ILENGINE

    CV730 has me stumped

    Changing jets may help. Seems like the Amazon carbs that I have received have all run rich. At least the Kohler carbs, Not so much with the carbs for Horizontal Kawasaki engines, but did have issues with a float leaking shortly after installing an Amazon carb on a Kaw used on a Scag. OEM was...
Back
Top