Search results

Will almost guarantee the high speed jet has dirt in it. Are very small holes along the jet could be plugged or the main jet that screws into it is plugged , or open the jet with a screw driver. If you get a new carb sometimes that jet has to be drilled out with carburetor drills.

I have an older Kohler similar problem hard starting in idle, until you increased the throttle. Inside the carb there is a jet that has 2 O-rings very small. Bottom O-ring was cracked, replaced O-ring and all is good. The jet is removable about 1" or so long.

Yes sir there was plenty of debris in areas you mentioned. In beginning the clutch mechanism felt like it was hanging up. Each time I put a little spray here and there that problem got better. Right now seams the hang-up is a lot better will tell when another test after belts installed. Have it...

You are right in process of ordering belts. Thought they might be more expensive, not so, very reasonable Thank you for the advice. Your a smart man,

sorry 917.203900 Did think about the belts, they look in good shape. I know what your talking about, 500 hours. Hate to buy anything unless I am sure

AFTER learching in either direction mower drives smooth, does not pop back into neutral unless you step on the break. These machines are a dog to work on, What I have done remove the gas tank lubed the clutch cable and plastic forks, made foot peddle smoother to operate, did not see any broken...