Search results

You know if I replaced a dash on a car and seen a nipple like that I would be going crazy trying to find a hose that would be going to it....I guess thats what you get when you see "assembled in the US- with imported parts" many thanks!!!!

No it is the plastic standalone carb,when looking down the throat of it, the fuel inlet is on the right side, where the fuel line connects, on that same side up a little higher is a white connection (it looks like a vaccum line connection) but nothing attached, if you squrt carb cleaner down the...

I shot a little carb cleaner in it and it came out the front- to goes to the primer bulb....Question How does this work?? Im baffeled- of course it doesnt take much- but im baffeled

Ok I looked through the forum and couldnt find what I was looking for- I have a small Murry lawn mower with the 550E B&S on it, bought used 2 years back and kept it for a backup/for the ditch, It wouldnt start so I disassembled the carb cleaned it out, removed the plastic white piece in the bowl...

I dont want to be a dummy jumping in on this post, I own a Cub rider with a Kohler that will pull that "dead battery" thing. With me it is the compression release due to out of adjustment valves, it will either groan through a slow "dead battery" thing where the motor barely turns, OR do...

I was at walmart yesterday and the gas powered t(what we use to call a throw away) push mower with b&s, was 294 bucks....were talking 89 bucks a few years ago.... They are forcing you to electric.

I am in the middle of replacing the bushings because of extreme play in front axle, been better if I wouldnt have bothered. I ordered the bushings (yes there are 2 of them amazon has them as a pair) they pry out easy they are bronze I believe BUT the hole is so large the bolt doesnt take up any...

Pretty simple I bought a used Husqverna ...CHEAP, started going through it gonna give to son-in-law, found out it is a MIX of years and parts from everything under the sun and most all wore out, no problemso Im replacing bushings and run into the from axle 2 bushings no big deal, pulled the bolt...