Search results

Results 1 to 7 of 7
  1. G

    Your opinion of a Briggs DOV engine?

    I bought a Snapper RER a few weeks ago that I got refurbished and running good. Included with the RER was a 21" self propelled. It wasn't running but would turn over. I added some needed oil, checked for spark, and confirmed that it would fire with a little starting fluid. I was able to pull the...
  2. G

    How do I tell which LMT Walbro that I have for parts selection?

    So I go to a small engine parts website and put my engine Model and Type (286707-4029-01) in to order, new imulsion tube. I click on the Carburetor drawing and it brings up a page of exploded parts drawings that include a Nikki at the top and a Walbro at the bottom. The walbro has a 125 in the...
  3. G

    Adjustment of a new B&S OEM 799728 by Nikki on my Snapper RER 10HP B&S L-Head?

    I bought the Snapper RER that was running rough. When I tried to start it some times gas would come out of the carb intake flange, O ring leaking! I did a rebuild on the Chinese Nikki copy' including the tiny, tiny O ring on the main jet that came from the Kohler rebuild kit for Nikki carbs...
  4. G

    Things I should check before running a used motor that I bought?

    While searching for a Walbro carb for my 10HP B&S I found a '94 vintage12.5HP B&S I/C Quiet off of FB Marketplace for $75. Of course the picture looked great; too good to be true. I went to look at it and it would turn over and seemed to have good compression so I bought it. The carb was...
  5. G

    Should I be concerned with an damaged/enlarged Emulsion Air Intake Port on my Walbro LMT 5-4993 carb'?

    I don't know how it got opened up more but you can see that it is enlarged. If it causes a leaner emulsification can it be corrected with the adjustment screw. Or does that fixed jet that screws in straight down next to the adjustment screw control that mixture? That port and the Air Intake...
  6. G

    Where can we find carb' overhaul kit #'s for carbs that are no longer available?

    For my case I found a B&S 799728 carb' made by Nikki, not aftermarket, on Ebay, new in the box. I think that I should get an overhaul kit while I can. I'm having a hard time finding the B&S overhaul kit. As some old timer pro's have said the B&S web site that I found is useless, doesn't even...
    • GAJoe
    • Thread
    • carb kit list carbs that are no longer available carburetors that are no longer available
    • Replies: 1
    • Forum: Snapper
  7. G

    B&S 190cc hit a rebar, now knocks a couple times on start-up, shaft isn't bent, what's your guess?

    I have a motor from my old Toro Recycler 22" (10 Yr old deck cracked.) 7.00 190CC mounted on a Murry Ground Force 3 Deck with spoked high back wheels (got it for $25). It makes a strong push mower. I hit a rebar and it died instantly. The blade doesn't contact the deck anywhere. I checked for a...
Back
Top