Search results

IPL?

Does anyone know if 44p777 and 446777 engines have the same cylinders/heads/etc. Trying to salvage one motor with another.

Husqvarna EZ5426 BRIGGS 44P777 I made a previous post about not being able to get my pto pulley off. Well I got it off but crushed it. Jacks small engine schematic website says they no longer make the pulley but i found one on ebay. Here is my issue. My clutch is not sitting high enough on...

2006 Briggs 44P777 550 hours First time working on small engines. I appreciate everyone's help in my previous posts. Got the engine out. I have a missing push rod that I found in the oil pan. Two questions. 1. While I have the engine out I'm checking on everything else. The rods have no...

I bought some new parts because I need to change the head along with some other things. One of the tappets came with rust on it. Do you think It would be fine if I sanded it down or should I ask for a new one? I was actually thinking about doing this but use my front loader and straps to lift...

Found an old acetylene tank in the garage from my grandpap. Heat didn't work. I tried cutting it but can't get close enough without hitting the shaft or the frame (I ordered a new pulley). Time to get a bearing puller and try that.

Thanks everyone. I tried a pulley puller and it started to bend the pulley so I stopped. If I used heat and the puller, I feel like the pulley would bend alot easier. What the difference between a bearing and pulley puller? I've tried putting the bolt back in and the air hammer. I guess I...

HUSQVARNA Ez5426 zero turn Briggs 44P777 I'm trying to pull the motor and this pulley will not come off. It runs the hydraulic pumps for the steering. It's above the clutch. There is a keyway, am I missing a set screw? I didn't see any on the schematic. I've tried a puller, PB Blaster, and...

Need some guidance. Never worked on a Briggs Engine (44p777) but have rebuilt some 2 stroke top and bottom ends and am pretty handy with just about anything I play with. 1st, some photos. Took off the engine shroud and I could be wrong but it doesn't look dirty enough to have blocked the...

Thanks for the help. The engine never has ran low on oil. I check it each time I start it and change it ever 15-20 hours and then again when i put it away for winter. I was reading the operating manual for the briggs engine and it states to "clean the combustion chamber" at 400 hours. How the...

2006 Husqvarna EZ5426 44P777 Briggs Engine (Extended life series) 550 hours It all started when I accidently ran it out of gas about a month ago. I put gas in it and started it back up and it was backfiring and sounded horrible. I towed it back to the garage and did the normal maintenance...