Auto Doc's
Lawn Addict
- Joined
- Sep 7, 2024
- Threads
- 23
- Messages
- 1,944
That is about a 30-year difference between chassis designs. Way too many differences and it would take a lot of custom adaption/ fabrication to fit the newer X738.
Honest Abe
Well-Known Member
- Joined
- Jan 18, 2013
- Threads
- 3
- Messages
- 334
are you any good at retrofitting things....
Auto Doc's
Lawn Addict
- Joined
- Sep 7, 2024
- Threads
- 23
- Messages
- 1,944
With a cutting torch, a stick welder and some heavy scrap metal anything is possible.
I used the Deere OEM plow this morning on the x739 (2021). Deere's front hitch will allow you to hang the plow off the front end; and includes the hydraulics. Our previous Deere had a manual blade I had rebuilt (previous owner installed it all wrong and wore it to the point of breakage), but when I turned 70, I told my wife no mas. Ordered the x739 with 54" deck and 54" hydraulic snow plow. At the end of the season I drive the rig into the shed, lower and disconnect the front hitch, and the plow sits until next November.
