Zzz's latest activity

Hello Scubcadet10, This is where many people blame the Nikki carburetor because they could not just simply open it up and clean it with...

Hello P., The only adjustment on the carburetor is the idle stop screw with the Phillis head. The generator governor and tension adjust...

https://www.ebay.com/itm/324264091762 is a link to a carburetor for my engine. The engines is 0304-30 b - 01. Not to sound completely...

Thanks for the info. I will try to get a diagram of the carburetor float mechanism for this engine and see what I may have inadvertently...

I spotted that o-ring when I took the carburetor back apart and made sure that it was seated properly around the plastic piece that goes...

Couple of things that could of occurred. First the float valve may not be sealing. And 2nd that style of carb has a removable plastic...

Hello P., This problem sounds like a bad float needle allowing too much fuel to flow past it and the seat. The needle acts like a fuel...

I took the carburetor off. I was able to remove the two screws and took the carburetor bowl off.There was a little bit of gunked up gas...

Thanks for the in depth info! I really appreciate the time you took to help me make a good decision! Thanks again

Hello P., This is only a 10,500-Watt steady power unit. That is too small to run a whole house in my opinion. People often pick too...

This would be to run the whole house for whatever length of time was necessary. Dual fuel is a good option and the electric start is a...

Just drove over and picked up a set. I shall give it a shot tomorrow when there is enough light. Thanks for everybody's help ‼️

E5 external torx.. Harbor freight has em

In the event I don't repair my Briggs & Stratton defender 8250 generator, I saw some good prices on Westinghouse and Duramax electric...