Recent content by Wyokid

Update. I brought the mower home last week and after the info I got from ILENGINE ordered the correct coils. It arrived today and I installed myself. The mower runs like a champ. Again, thanks for all those who contributed to this thread, especially ILENGINE who identified the problem!

I can confirm that ILENGINE has cracked the mystery and is a genius. Thanks! And thanks to all those who contributed.

Here's the info

KT735

Here's an update of what was done. Checked stator Checked load to drive pumps Removed both cylinder heads and replaced gaskets Replaced intake gaskets Checked timing key Replaced muffler Checked engine spark Checked fuel pump Checked fuel intake Checked compression Checked cylinder Temps It...

The shop had all the heat shields off and said the muffler would glow red after about 10 minutes. No temp gauge on the machine. I haven't picked up the machine yet as I was hoping to gain some knowledge here before refusing to pay the bill.

I only have basic mechanic skills. When it started having issues, it seemed like it was missing. The coils that came originally are no longer available and Kohler went back to the version I bought. There was several youtube videos addressing what I thought was the issue. There was no change in...

It stopped running pretty fast

Here is the coil. The shop did a spark test which showed the coils were good

I need some help. I have a Kohler 24hp 7000 series on a Craftsman zero turn. This spring I took it for the maiden voyage mowing and ran it out of gas. I refueled it and it was missing on one cylinder. After some research I did a coil upgrade that didn't help. I took it to the local small engine...

I need some help. I have a Kohler 24hp 7000 series on a Craftsman zero turn. This spring I took it for the maiden voyage mowing and ran it out of gas. I refueled it and it was missing on one cylinder. After some research I did a coil upgrade that didn't help. I took it to the local small engine...