Recent content by whmtd

hi I am currently working on a Briggs 11hp engine model number 252707 from 1981 it hadn't run for a least a couple of years I brought the tractor from a neighbour for ｣45 (that might sound a lot to you in the us but in the uk ride ons are actually pretty scares so prices are very high :frown:)...

hi I have just acquired a ride on mower that has been sitting in a barn for 3 years after getting it running I have noticed that the transmition is a bit sloppy is there a way you can change the fluid without having to take the gearbox apart it is not a hydro

hi I have a hydro mtd ha4145 the transmition fluid is getting a very low and I need to top it up before it dos damage but what oil do you use and do you just top it up or change all he fluid? thanks:smile:

hi I brought by mtd around 2.5 years ago second hand I have not changed the fluid myself and no idea when it was last changed do you even need to change it? I defiantly need t top it up as the level has slowly gone down over the years. What oil do you use for this any help appreciated t:smile:hanks

hi I have a wheel horse b111 which I have recently brought It drives fine but I noticed underneath the belt rubs and and I cant seem to work out how to stop it also the hole for the high low range lever does not have a lever in it I thought this was as it was new as it is a six speed and has...

hi there I have a 11hp Briggs and Stratton from 1978 whoever owned it before me has hammered what looks like an exhaust and muffler from a push mower into the hole in the engine block the muffler is completely rusted out inside (The baffle plates) and is incredibly noisy as a result I have...

heres a question that I have been wondering for a while is an old 70s briggs as you have to adapt a car else the engine will be ruined after a few thousand miles

Hi I have a old Briggs engine on a wheel horse from 1978/9 after spending a fair amount on the engine I decided I would change the oil but I could not see he oil filter does it have one ? I presumed it did as the engine on my mtd does in addition there s no oil dipstick just one of those screw...

hello to all I have recently brought a wheel horse b111 it was running when I brought it but needs a lot of work... my first job has been to solve the lack of spark which I have done by replacing the old points and condenser system with a newer electronic ignition coil although it is new firing...

I have recently acquired a wheel horse b111 it was running fine when I first got but two days later it will not start. At first I thought it was the carb as I adjusted it whilst running because it was really rough but after adjusting it to the original factory settings and making sure fuel is...