Recent content by VegetiveSteam

  1. V

    Does anyone have a current repair manual link for the KT735 series engines?

    https://techcomm.rehlko.com/techcomm/pdf/32_690_03_EN.pdf
  2. V

    Kohler SV-600 Air Gap

    Unless the flywheel is actually touching the ignition module, it could be a compression release issue or a valve adjustment causing the engine to hang up. If you do a compression test and it's over 100 psi, that would tell you compression is too high. Then you just need to find out why.
  3. V

    Kohler SV-600 Air Gap

    Are you able to do a compression test?
  4. V

    CV730 has me stumped

    You may ave it fixed by now but if not, have you checked for any exhaust restriciton?
  5. V

    2002 Kohler 25hp Command Vertical Shaft Issues

    If you're sure it's a 25 horsepower the 24 755 308-S kit is the only way to correctly fix it if it's an ignition issue. Just to clarify what you have, your SAM should have 2 brown wires, 2 yellow wires, one red, one white and one either green or black. If you look at the back of the SAM you'll...
  6. V

    Craftsman Kohler engine stuck both intake valves in the guides

    Yep but next it will be on the new heads.
  7. V

    Craftsman Kohler engine stuck both intake valves in the guides

    Almost no question it's fuel. You can usually get them free if you squirt some Kroil/ATF mix in and let them sit. The guides aren't replaceable because they are the parent material of the head. Kohler does make a replacement valve with an oversize valve stem. If the guide is worn, you would ream...
Back
Top