Recent content by Trick1

Not sure of the tolerance play on fore and aft of the front beam. If anyone knows and if the large nut is to take up slack or worn out bushings?

Hello again, I recently bought a 252z 992128 # 00579 with a Kawasaki 25hp and 1000+ hours on it. It has some blow by, going to pull the flywheel and check the vent, I know it might need a rebuild or I have a low hour 24hp intek 9amp I guess would need a upgraded alternator. It might last the...

I picked up a Gravely 252z 25hp Kawasaki for 5+ residential acres I mow. I can't seem to find spindles that cross reference with OEM. #59225700 discontinued to # 69219700 It appears the middle spindle is different from the outside ones as it being taller but then a diagram shows all 3 the same...

Hello again, I recently bought a (used of course) 252z 52" Gravely. I have been mowing 5+ acres on a 42" rider to the tune of 6 hours cruise. The first day with the 252z it took 3 hours and was still feeling out the mower. So I started looking up wearables to keep a small inventory of parts on...