Tiger Small Engine's latest activity

Unless the blades are gear drive or clocked with a timing belt the blades will not stay clocked and will collide

Anyone that runs 100:1 in anything, old or new, is crazy. I read about it all the time online, and am not disputing that people do it. I...

Keep in mind that as you become exceptional proficient at something, it is hard to find people who can offer more. I belong to another...

Carb needle sticking open. Clean or replace needle and seat. Please describe this testing procedure. What is fine about it? Cease...

Back in 1998 i paid $350 for a commercial stihl FS80 string trimmer. I have 4 acres and have put probably a half dozen tanks of fuel...

I recommend no mulch plate. Raise the plastic exit at a 45 degree angle and let the grass fly as far as possible. Remember to lower...

At that price and a bad battery with signs of rigging? Run Forest Run. As a minimum a new battery should already be in this thing. Over...

If it takes you 2 hours to mow with a self-propelled mower, you should strongly consider getting another mower. Rebuilding this engine...

This problem favors a bad heat thermostat on the muffler that is not opening the choke has it warms up. The other problem is if the...

A piece of painter's tape works fairly well. Put it on the tip while working the ring off with a pair of pocket screwdrivers. If...

Yes seat is off another mower as it is off a 42" cut mower. What year is the engine? hoping it is the original engine. 13AT674G401...

“Oppy” means opposed twin. People cannot get the correct parts at their local small engine shop without a model number of the mower or...

Bad Boy already prices their mowers aggressively low. I wonder how they could offer a 25% military discount? I am sure they don’t have...

The adjustment rod normally has threads that end, therefore you can’t keep tightening the nut. By putting a spacer, shim, washer...

Enlarge the pilot jet as a last resort if no air leaks, etc.