Tiger Small Engine's latest activity

There are tons of threads on blade sharpening on this, as well as other sites.

I acquired a Cub Cadet XT1 with a blown Chonda from my neighbor. It had a broken connecting rod and a hole in the block. Her son in law...

I acquired a Cub Cadet XT1 with a blown Chonda from my neighbor. It had a broken connecting rod and a hole in the block. Her son in law...

I would start by draining some fuel from tank and checking it for water. Then blow back through fuel line into tank with air compressor...

I suspect that the float valve is not sealing allowing overfilling of the carb. When you turn off the key it is killing the fuel...

They are usually Chinese knockoffs of Honda such as Lifan or Powermore. Dealer orders them this way to lower price point.

I realize that blowing back through the tank on some riding mowers and zero turns is temporary, without actually draining/siphoning and...

The best practice when you are using tools daily is to at least replace them in correct spots daily to prevent misplacing them, and...

I would recommend going to your local Stihl dealer and letting them help you locate the correct trimmer line head. They can install it...

What is “high hours?”. Does mower have steering dampers on steering arms, and is does one damper need to be replaced? Obviously you need...

Also be sure to blow through fuel to fuel tank with cap off to remove any debris caught in the line or connections.

Typically, this is a clogged fuel tank outlet. Trash in the tank. Could be internally deteriorated fuel lines from tank to carb...

Well what is the exact issue then? You seem to be up on your game.

How can spec be 3800 RPM when maximum for a small engine is 3600 RPM?

See post #3. Add short term memory loss to list.