Tiger Small Engine's latest activity

Check belt tension between the two longest points between pulleys.

The belts themselves aren't the problem. Other issues are causing the belts to fail..The deck needs to be checked for damage. The...

The solution is buy a gas mower.

Also check for any burrs, sharp spots on pulleys and file smooth as needed. Use washers to get pulleys as close to level as possible...

If you look at the picture carefully, you will see the problem. You have pulley alignment problems. I suggest getting the deck out from...

If you are getting good, steady fuel flow to carburetor, then the carburetor needs attention and be cleaned.

Safety switches on mowers are like safeties on a firearm. They are there to protect the manufacturer, the owner, and other people. When...

Hydro drive belt came off or broke,

I suspect you would burn up the clutch pull in magnet attempting this. These are designed for immediate on and off operation. Sounds...

One aftermarket carburetor that didn’t work as an example, is not exactly like having a hundred aftermarket carburetors that didn’t work...

I would not call that a small engine. We both know you have to remove engine from mower (or equipment), crack the case open, remove...

Let’s see it.

Mulching never works better than letting the grass fly out of exit chute. Preferably with the plastic grass shield up so the grass can...

Just wanted to say hi. 13 pages for a tire leak is pretty gundy.

I obviously know the difference between an L-head engine and an OHV engine. I said that early in the thread when he was describing things.