Recent content by thebuildingguy

new information: I charged battery all night and this evening i held seat sensor down and I started the mower and with brake released and holding the seat sensor down I engaged the pto. the mower deck engaged and continued running without fail for approximately 30 minutes. I then disengaged pto...

By no change, I mean the mower starts and mows several minutes then loses power and dies and will not start again until it sits for at least half an hour. So after wiring from the regulator to the starter, i verified 14.6 volts across the battery terminals and the same at the clutch. Prior to...

I wired from the regulator output and verified 14.6 volts across the battery terminals, however there‘s still no change. it will be a little while before I can start the mower again, so while I wait id like to ask a question.-once started again , if I test the voltage to electric clutch, I’m...

thank you so much. i know just enough about all this to tear up more than I can repair a lot of times. i will wire it this evening and post about it when I’m done. This forum is priceless because of the knowledgable people like you that take the time to help people like me. Thank you for your...

I have a scag wildcat (SMWC-61v) with a Kawasaki 26 hp liquid (Fd731v). I’ve owned the mower for 3 years and it has mowed like a hoss until this season. The mower will start and run in good order. I’ll engage pto and will mow for several minutes then lose power and die if pto not disengaged in...

I have a scag wildcat (SMWC-61v) with a Kawasaki 26 hp liquid (Fd731v). I’ve owned the mower for 3 years and it has mowed like a hoss until this season. The mower will start and run in good order. I’ll engage pto and will mow for several minutes then lose power and die if pto not disengaged in...