Have an 1450 International CubCadet
1976 i believe with deck Used weekly
By now means new, but not abused
either
Has original Hour meter reading 526 hrs.
Has hydraulic lift cutting Deck
Few tears in seat but have replacement
seat that goes with machine.
14hp Engine uses No oil, cuts and...
Hi, first time posting from ,Ohio.
I have a mtd 31ton horizontal and verticle Log splitter.
Has newer 8 hp Preditor engine, runs great.
Missing a fender and a few pits on splitter shaft.
Previous owner left cylinder out and left outside.
I went over machine took some crocus cloth to
the...
I have a Simplicity 7010 model # 1690204 with a 42 inch cutting deck.
I am in need of belt that goes from pto on left side of machine to the drive pully
on top of cutting deck. Also could use the belt diagram to install this belt.
Thankyou pogie
Hi! I have the above mentioned Murry Hydro model 42910x92a. It had a bad 14.5hp Briggs & Stratton.
I swapped bad engine out with a 19.5 HP Briggs & Stratton that was removed from a Craftsman T10000 series mower.
19.5hp has 3 wires. one by itself coming from coil and the other 2 wires together...