Recent content by spetrilli

Only suggestion I have is in place of using stabil with your ethanol free fuel is to use sea foam product. I put 8 oz in every 5 gallon container of ethanol free fuel. It not only will stabilize the fuel for at least a year, it also serves as a fuel system cleaner. Depending on the engine...

I have i have a 747 cc Kohler on my Bad Boy ZT 54 in Elite. The 747 is 22 to 25 hp. Have used full synthetic 10w30 since my first oil change (I am in the central Midwest. Just use a quality oil and do your oil changes at or before the recommended number of hours. Also use nothing but...

I use nothing but ethanol free premium in all my small engines, plus I put 5 to 8 oz of seafoam in every 5 gallon fuel container before I fill it. I got tired of rebuilding and/or replacing carburetors on my equipment due to the negative accumulating effects of ethanol blended fuel on...

Are you saying the engine cranks but won’t start or you just get a click? If engine cranks but won’t start check to make sure the manual choke is working. If it just clicks, methodically check every wire connector and safety switch… there are a lot of them, not just the seat switch. Check...

Well stated

Conventional and Synthetic oil are both based on oil stock. Conventional oil is refined and the refinement process (cracking) produces different products at each stage (diesel fuel,gasoline,kerosene, oil stock for motor oils). The resulting lubricant molecules are not of consistent size...

What about the switch which engages the blades. Most riding mowers will not allow you to start the engine if the blades are engaged or it thinks the blades are engaged. Same goes for the switch which engages the wheel drive. If it thinks you have the handles positioned to the drive position it...

What about the switch which engages the blades. Most riding mowers will not allow you to start the engine if the blades are engaged or it thinks the blades are engaged. Same goes for the switch which engages the wheel drive. If it thinks you have the handles positioned to the drive position...