sivicman's latest activity

  • S
    sivicman reacted to StarTech's post in the thread John Deer Pulley Problem with Like Like.
    No they are the manufacture of transaxle not John Deere just like Kawasaki, Briggs, and Kohler are not made by JD just markup a lot and...
  • S
    sivicman replied to the thread T2290 HST Fluid Change.
    Removing the oil filter drains out all the oil. The hardest part was refilling with the new oil.
  • S
    sivicman posted the thread T2290 HST Fluid Change in Kubota.
    I changed the transmission fluid and filter on my T2290 w/245 hrs. Kubota says to change it at 600 hours. It took 3 qts. of 20W-50 oil...
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    I finally got my mower back from the dealer after 8 weeks of being gone. JD replaced the deck with a completely new 54" deck. They...
    • IMG_1516.jpg
    • IMG_1517.jpg
    • IMG_1518.jpg
    • IMG_20260917_114347559_HDR.jpg
    • IMG_20260917_114357621_HDR.jpg
    • IMG_20260917_114408867.jpg
  • S
    sivicman replied to the thread JD x370 - went completely dead.
    If it cranks and no start, it's probably a fuel solenoid. I've had a lot of problems with mine on my Kawasaki.
  • S
    sivicman reacted to StarTech's post in the thread x300 will not move with Like Like.
    Actually the X300 come in two flavors a X300 and a X300R. X300 has two idlers and the X300R has five idlers. So it must be the X300. And...
  • S
    sivicman reacted to asand211's post in the thread Uneven cutting Z412 with Like Like.
    I wanted to update everyone on the issue and that I figured it out. I removed the center blade which I knew is the one causing the...
  • S
    sivicman reacted to Mark H_NO's post in the thread 54" deck. Uneven Cut with Like Like.
    That sounds decent, if you like the mower otherwise... Best of luck to you...
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    The dealer called and said they are getting a complete new deck from the factory, and are willing to apply POR 15 to the bottom, and...
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    You are exactly right. More money and less quality on everything you buy.
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    It's funny you should say that. I went up to the Home Depot to look at the underneath of their S series decks, and they to DO NOT come...
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    This is what I was told by the service manger who is an idiot. It might be a PIN label he is referring to. I was not willing to accept...
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    Sand blast it if possible.
  • S
    sivicman reacted to MParr's post in the thread 54" deck. Uneven Cut with Like Like.
    It's evident that the John Deere dealer didn't do a proper PDI on that particular mower. It happens a lot.
  • S
    sivicman replied to the thread 54" deck. Uneven Cut.
    I know the lack of paint did not cause the uneven cut. The deck was leveled per JD manual and still was cutting bad. The unpainted deck...
Back
Top