sgkent's latest activity

that would lead me to believe you have a vacuum leak or plugged jet / needle and seat. I have seen on a rare occasion depending on the...

you won't know if you can re-use the gaskets until they are off. Sometimes they are pliable and come off cleanly. Sometimes they are...

AI analysis: Production Details Year of Manufacture: 1994 (Determined by adding 70 to the first two digits of your serial number: 24 +...

If #21 was always missing you might ask the person you bought it from if they have seen it lying around.

any place that air can get into the intake system, can affect mixture. That includes blown head gaskets and cracked intake manifolds...

https://www.ebay.com/itm/178443263545?_skw=7037334&itmmeta=01M15D5FD7WC0DNDBDR0KMS483&hash=item298c0c1e39:g:1M0AAeSww99qj2E8&itmprp=enc%3...

just relying on the image looks like that is the detent mechanism that holds the shift fork in different positions/gears/whatever that...

anytime something dies immediately after fuel is added, the problem is usually fuel. Kerosene can empty? Water in the fuel?

Exmark 126-3949 is on fuel tank assembly page. $180 - $225 depending where purchased from. Better make sure a mouse did not chew a...

ask yourself why the pushrod broke. Was the governor messed with when the pushrod was replaced.

might want to leave it off for a few seconds after it dies, and measure the coil kill wire to ground to see if it is the coil kill wire...

there is a huge difference between a well maintained piece of equipment that needs repair, and something that has been allowed to...

might get an inexpensive oscilloscope and throw it into the circuit to see if they system is producing AC. Charging voltage can be right...

especially on a mower that probably should be at the end of its life and sent to salvage to part out.

send us a link to the carb you bought, or post photos. Lots of times on these replacements you need to figure out where the existing...