SeniorCitizen's latest activity

I wish all of these lawn tractor wheels were bolt toge I wish all small wheels were 2 piece bolted . I was assigned a army jeep in...

sometimes the rim rusts in a spot where air can escape , tire still good , remove tire clean up rust on inside of rim , repaint rim...

Does anyone know what a full boot for a tire is . They were common during the war and a few years after .

I've had a tire on a tandem disk leake because there was a bad weld on a 2 piece rim manufacture . No reason to apply more force than a...

I've worked on engines from lawn mowers to 2,000 HP 300 RPM TLA Clarks and I've never ever heard of dismantling a engine to check ring...

For those that do their own tire repair and have a drill press with a locking quill the D Press is a good way to hold the wheel down...

If you have no measuring tool for the bore and the cyl looks like a hone will suffice , check the ring end gap . Feeler gauges are...

Reads like it won't crank .

maybe the Clutch failed

You're Welcome

A spring will be close by that throttle cable connection . The spring tells the the speed you want it and the Gov makes certain it runs...

This link may help some . + A spot of paint on each connection point before removal of cable ends and connection point makes...

The main reason belts come off is a pulley alignment problem and you're in the correct area with a bad floppy idler bracket .

I've found a common wire brush won;t remove lead oxide very well . Maybe that's why a certain battery terminal brush was invented . I...