Recent content by rossfrank

does anyone know if the 9/16" nut is 18 thread per inch? I have to run a die over it.

Thanks for all the feedback guys. I ended up having to cut the nut off. Pulley has a hole in it about I don't know an inch round it's pretty much shot. Still hoping the tranny's okay. Fish, I have the tractor in gear now that the pulley and everything's off. I could still spin the spindle the...

Bolens 38" 6 speed model 13AM 762 F 765. The pulley on the transmission loosend up and sheard the star shaped holders off of tractor. I tried to remove the 7/8" nut that hold the pulley on but the entire shaft spins so I am unable to remove the pulley. Is the fact that the shaft is spinning...

Can I use a Briggs & Stratton muffler on a predator engine? Will it affect the operation of the engine if it's a different muffler than the one that was on the engine originally? Thanks Ross

Predator 212CC LITTLE WONDER WALK BEHIND LEAF BLOWER

I picked up a predator engine for my leaf blower. Engine's good everything fits except for the muffler. It slams up against the back of the leaf blower housing and there's no way it's going to fit. My question is can I use any muffler on this if I could find one that fits? Or, can I purchase...