Recent content by rkf_bomb

Hmmm. Maybe I'll just leave the charging system disconnected. The motor starts instantly so can't be much of a draw. Probably measure the time it takes to start in milliseconds! Thinking I'll just keep the battery tender next to mower and plug it in every week or so. It is so nice having...

It doesn't run any lights. For charging battery only. I guess I'll see over time how well it works or doesn't work!

Hey all just wanted to say thanks again for all your help! Mower is running great! Started up first time! I still have to connect the stator charging wire to battery side of solenoid. I have all the wiring there, and the diode is crimped on and all set. I ran out of ring terminals so I just...

Yeah I thought about that. I needed a good project though! I'll have under $100 in it and it gives me something to do. I like tinkering around in the garage. It's where I find my peace!

Alright then looks like I'm good to go. Thanks again for your help! Ron

Thanks for your help everyone. I have one more question. I had to buy a new ignition switch as original was only a 2 position, 2 terminal switch. I bought a universal 3 position, 5 terminal switch at the local box store. It looks like briggs went from a 5 terminal to a 6 terminal switch at...

I wouldn't exactly say I'm 'worried' about it. Just wondering if I could make it better. You yourself stated that it will run the battery down as the mower is not running long enough to charge the battery. I'm all for learning new things and trying to make things easier (and cheaper)for...

Thanks y'all. Could I get a regular voltage regulator instead of the single diode?

Copy that. Thanks!

Hey all, I acquired a Briggs model 287707-0227-01 engine(14hp, I/C). I put it in my 36" commercial walk behind mower as the original Kawasaki engine decided to throw both valve seats. The kawasaki was pull start and the briggs is electric. I start it with a starter/charger I have...

Thanks for your help!

When you say not to solder due to vibration and heat do you mean that the heat from soldering will hurt the diode? I can move the diode far from the engine since I have to splice it in anyway. I've always thought soldering was the better way to go but I'm just a hobbyist. So basically my plan...

Edit- Disregard following post, LOL. I just realized you posted the actual diode #. Thank you! Thanks StarTech. I'm actually looking for the type of diode briggs uses. They want $10 for that diode. I can go to my local electronics store and get one for $.50. I would consider getting the...

Hey all, I acquired a 14hp briggs I/C engine I'm putting in a gravely 36" walk behind mower. Model 287707-0227-01. The wires coming off the stator have been cut, which is where the diode was. There is still enough wire coming out of the stator but someone down the road cut off the...